02-11-2013, 02:28 PM
(This post was last modified: 02-11-2013, 02:30 PM by zx_volcane.)
How are you going to be cutting it? Obvs thinner is easier and 6mm is plenty strong for plates.
If I was getting it got cheap or free I wouldn't turn down 7,8,9,10mm etc
It's just a bit of metal end of day to perform a simple function, doesn't need to clever or even brand new, could cut out of scrap if it'll clean up fairly good and is mostly flat
Paul fabbed my gearbox mani out of all sorts of old bits of scrap, reused old adaptor plates i made for other turbos for the end plates, old bumper bracket for support ...etc
If I was getting it got cheap or free I wouldn't turn down 7,8,9,10mm etc
It's just a bit of metal end of day to perform a simple function, doesn't need to clever or even brand new, could cut out of scrap if it'll clean up fairly good and is mostly flat
Paul fabbed my gearbox mani out of all sorts of old bits of scrap, reused old adaptor plates i made for other turbos for the end plates, old bumper bracket for support ...etc
![[Image: avatar_zpstlcgvhg8.jpg]](http://img.photobucket.com/albums/v363/toastmonster/avatar_zpstlcgvhg8.jpg){kind=avatar}
