23-10-2013, 08:25 PM
(This post was last modified: 23-10-2013, 08:27 PM by underground375.)
Hi all im trying to piece together how I can put my ph2 window switches in my ph1 one. The passenger side is easy, but I just cant work out the drivers side. There was a old guide on how to do it but the wires he stated on the later switch loom doesn't match the plug I have.
Could anyone help? Heres a picture of the plug I manage to get my hands on.
This one was out of a ph3.
Here is the order I found which doesn't match up with my ph3 plug.
1. Orange > White
2. Cream > Blue
3. Red > Grey
4. Red > brown
5. Red > Green
6. Cream > Lilac
8. BLANK
8. Earth > Connect to the other 4 earths. (Green and yellow)
Now, the numbers are worked out like this, so find out which way up it needs to be.
1 2 3 4
5 6 B 8
The plug he used was out a ph2? Which makes me believe they changed the colours on the plugs on the ph2 and ph3 would anyone be able to peace together which wires on the ph3 plug go's with the colours on the ph1 loom that is stated above.
Could anyone help? Heres a picture of the plug I manage to get my hands on.
This one was out of a ph3.
Here is the order I found which doesn't match up with my ph3 plug.
1. Orange > White
2. Cream > Blue
3. Red > Grey
4. Red > brown
5. Red > Green
6. Cream > Lilac
8. BLANK
8. Earth > Connect to the other 4 earths. (Green and yellow)
Now, the numbers are worked out like this, so find out which way up it needs to be.
1 2 3 4
5 6 B 8
The plug he used was out a ph2? Which makes me believe they changed the colours on the plugs on the ph2 and ph3 would anyone be able to peace together which wires on the ph3 plug go's with the colours on the ph1 loom that is stated above.