When mine had gone it was the engine mount that had broken.. But the chassis can crack and the captive nut underneath is then no good.
Pics of mine with the engine mount broken. I replaced it with a cheap motor factor part and that was rubbish, so removed and returned that and fitted a genuine Pug one iirc it was around 54 quid all in.
Mine was knocking under acceleration and when i started to look around i found it made this noise..
And when i took it apart this is what i found.....
The bottom of the mount was till screwed into the chassis, so a hammer and screw driver and then mole grips got it out..
Luckily my chassis was ok !!
BUT if your not so lucky and the chassis bit is broken it can look like this...
http://306oc.co.uk/forum/thread-16377-po...#pid316794
Pics of mine with the engine mount broken. I replaced it with a cheap motor factor part and that was rubbish, so removed and returned that and fitted a genuine Pug one iirc it was around 54 quid all in.
Mine was knocking under acceleration and when i started to look around i found it made this noise..
And when i took it apart this is what i found.....
The bottom of the mount was till screwed into the chassis, so a hammer and screw driver and then mole grips got it out..
Luckily my chassis was ok !!
BUT if your not so lucky and the chassis bit is broken it can look like this...
http://306oc.co.uk/forum/thread-16377-po...#pid316794