21-09-2013, 06:39 PM
Before you rant "just fix it" ; i've had the ECU plugged in and read the fault code.
The fault read from the rear O/S sensor; i (me and max) started removing the old sensor from a spare beam (read a decent V when spinning the hubs, thus working sensors) and both sensors seized in like an absoloute whore.
So, decided it was/is going to be impossible trying to get the sensor off the sitting beam.
I spoke to the garage who are very familiar with peugoet's and there brake/electrical problems. He knows that i was suggesting to trick the ECU/light and was happy for this if i wanted to..
My aim is to wire the ABS light into the + on the glowies.
I checked the ABS ECU for a live for the light, i found 5 live wires - 2 grey main for the ECU, and 3 other (orange, red, yellow) for which i assumed were a live for the dash light.
i turned the ECU power off and put a live into each of the 3 coloured wires, one by one to check an illuminated dash ABS light - nothing.
I've checked the haynes manual for anything, and still, no wiring diagram for the ABS ECU loom
Can anyone shed some light on which wire/ how to do this.
I only need to wire a + frow the glowies into the + from the ABS ECU to the dash light.
I also had a crack at the dashboard, but given all the bulbs luminate across a board and the impossible task of stripping back the plugs, this isn't really an option
any help greatfully appreciated
The fault read from the rear O/S sensor; i (me and max) started removing the old sensor from a spare beam (read a decent V when spinning the hubs, thus working sensors) and both sensors seized in like an absoloute whore.
So, decided it was/is going to be impossible trying to get the sensor off the sitting beam.
I spoke to the garage who are very familiar with peugoet's and there brake/electrical problems. He knows that i was suggesting to trick the ECU/light and was happy for this if i wanted to..
My aim is to wire the ABS light into the + on the glowies.
I checked the ABS ECU for a live for the light, i found 5 live wires - 2 grey main for the ECU, and 3 other (orange, red, yellow) for which i assumed were a live for the dash light.
i turned the ECU power off and put a live into each of the 3 coloured wires, one by one to check an illuminated dash ABS light - nothing.
I've checked the haynes manual for anything, and still, no wiring diagram for the ABS ECU loom
Can anyone shed some light on which wire/ how to do this.
I only need to wire a + frow the glowies into the + from the ABS ECU to the dash light.
I also had a crack at the dashboard, but given all the bulbs luminate across a board and the impossible task of stripping back the plugs, this isn't really an option
any help greatfully appreciated
Diablo Hdi Dturbo and 205 1.9 project - it lives!
