17-09-2013, 05:19 PM
small update; weather has been CRAP so been stuck in the confinement of the garage; not wide enough to get a jack under and get on with any under work (exhaust, arches, bumper) so got on with what we could.
Sorted out the glowplug relay after having issues with getting the relay power and then not holding the 12v. Anywho, sorted it, NOT bodged
managed to get slam panel, rad, hoses and fans on;
![[Image: f1W2iqX.jpg]](http://i.imgur.com/f1W2iqX.jpg)
Had to get to the scrappy and get an intercooler to use and a top rad hose; to cut a long story short, the car NEEDS to be on the road asap, with the 406 inlet manifold, i can't fit a standard TMIC as manifold change requires the K14 to be removed/pulled off etc.. havn't the time to do this, so a quick intercooler setup was required.
It's not fantastic but should do the job. SMIC FTW!
![[Image: C5yPAeA.jpg]](http://i.imgur.com/C5yPAeA.jpg)
Sorted out the glowplug relay after having issues with getting the relay power and then not holding the 12v. Anywho, sorted it, NOT bodged
managed to get slam panel, rad, hoses and fans on;
Had to get to the scrappy and get an intercooler to use and a top rad hose; to cut a long story short, the car NEEDS to be on the road asap, with the 406 inlet manifold, i can't fit a standard TMIC as manifold change requires the K14 to be removed/pulled off etc.. havn't the time to do this, so a quick intercooler setup was required.
It's not fantastic but should do the job. SMIC FTW!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
