Why do i keep blowing.. giggedy.. switches

[ginge191]

Nothing else is being supplied via the same switch is it?

The only other thing I can think of is if the switch isn't rated to 25A.

Nope, nothing else through the switch. There's other appliances related to the fuses which the brake switch goes through. There're 2 fuses which relate to the brake lights, amongst half the other car

---

Think you need to do some investigating before you go replacing the switch. Try taking the bulbs out the holders and see if there is any corrosion. If so, get some lighter fluid and clean it all off then try again

Shall do ; i'll get a voltmeter on them when eli's home in case both bulbs have gone at the same time

I'll give the plugs and bulb connections a good clean scrape up