17-06-2013, 05:34 PM
Right, changed shaft and its still there. Checked all bolts and everything's fine. Also nipped up the top mounts on the shocks but there fine. It seems to be play in the steering rack. Its had new TRE but it seems to be movement in the rack. Steering is tight as when driving it does clunk the wheel when stopping and setting off.
Can the bit that holds the track rod to the steering rack cause this kind of symptom if they are worn? Easy to replace?
Can the bit that holds the track rod to the steering rack cause this kind of symptom if they are worn? Easy to replace?
TD04 11mm Sedan, now 2.1 vnt
Sedan Project http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Sedan Project http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead