12-06-2013, 05:49 PM
(11-06-2013, 10:26 AM)Dum-Dum Wrote: The bit on the inlet manifold you need to replace with one that points forward from a DW10 that came with an intercooler, they are about £35 from pug buy most people get them from scarp yards, the common place to fin them is a 406 110 HDi but pretty much every PSA car and van bigger than the 306 had them So you have the 406, 607, 806, 307, Expert, Boxer and all the Citroen equivalents and probably more than that.
The pipe off the turbo to the inlet is 'just' jubilee clipped on but there is a hook that hooks over a pin on the front of the turbo you'll need to pull off.
The pipe off the turbo is best done with a 41mm 90* silicone hose and a 2.2HDi (DW10) under engine pipe as it is a nice smooth bend, fits perfectly between the sump and box and has a nice smooth increase in size to 60mm (IIRC)
so i can pretty much just get all the parts off a 406 like the inlet bend and all the turbo pipes? i havent got to buy them brand new because i was going to pay 150 quid for the intercooler and universal pipes, would i be better off buying these or couoold i just get them from a 406 ?