07-11-2012, 01:23 AM
Thanks for the autodata info. I had a look and it says that pin 1 is battery voltage and pin 2 is earth. The wiring diagram in the haynes manual says that pin 3 is battery voltage and pin 2 is earth. The connector on the sensor also has numbers 1 to 3. Knowing how accurate the rest of the haynes manual is i'm guessing the autodata info is right but can anyone confirm that if you go by the numbers marked on the sensor that pin 1 is battery voltage, pin 2 is earth and pin 3 goes to the instrument cluster / speed dial.