Ordered my front mount, was a steal at £50 posted brand new. It's only a baby, but I don't want to get too chop happy with my front end. Plus will try and reduce lag. Just a shame the inlets are 3" as I'm only planning on running 2.25" pipes.
Update on plans:
1. Get spare rear axle rebuilt and lowered
2. Get spare engine rebuilt with hdi rods
3. Fit new head gasket and new head, updated head studs
4. Swap turbo over, xantia inlet and Fmic
5. 11mm frankenpump
6. Coilovers on the front, or perhaps slightly lower springs
7. Possibly banded Berlingo steels with Berlingo centers and 185/55/14 tyres
8. Berlingo 266 front brake setup
9. New heater matrix and plumb it in ready for winter
10. Carbon wrap the spare bonnet, possibly grill too or at least Matt black it
11. Would like some new reclineable buckets
12. Custom 2.5" or 3" stainless straight through with possibly fake rear box depends how much I care.
Hopefully all this done by next FCS!
Update on plans:
1. Get spare rear axle rebuilt and lowered
2. Get spare engine rebuilt with hdi rods
3. Fit new head gasket and new head, updated head studs
4. Swap turbo over, xantia inlet and Fmic
5. 11mm frankenpump
6. Coilovers on the front, or perhaps slightly lower springs
7. Possibly banded Berlingo steels with Berlingo centers and 185/55/14 tyres
8. Berlingo 266 front brake setup
9. New heater matrix and plumb it in ready for winter
10. Carbon wrap the spare bonnet, possibly grill too or at least Matt black it
11. Would like some new reclineable buckets
12. Custom 2.5" or 3" stainless straight through with possibly fake rear box depends how much I care.
Hopefully all this done by next FCS!