Posts: 1,681
Threads: 190
Joined: Jul 2012
Reputation:
2
Location: Northern Ireland
Car Model/Spec: HDI
Thanks: 1
Given 0 thank(s) in 0 post(s)
Quick question, if i put an xud9 lump in a 205 1.8d inca, will the 1.8 shafts fit in the 1.9 gearbox? Ive heard the 1.8td ones would be okay but not sure about the straight d.
Any advice would be great
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
Thanks: 4
Given 3 thank(s) in 3 post(s)
I belive you have to swap the diff so you can use the 205 shafts, or put the 306 joints on the 205 shafts either or and your good to go.
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
Thanks: 3
Given 89 thank(s) in 88 post(s)
swap the 205 diff into the 1.9 box and away you go on the 205 shafts, same shafts as the turbo.
Posts: 1,430
Threads: 132
Joined: Jan 2012
Reputation:
4
Location: Yorkshire
Car Model/Spec: 305 and 306 HDi's
Thanks: 1
Given 6 thank(s) in 6 post(s)
Drivers side should be fine.
Passenger side you can either a) swap the diff and use a standard shaft or b) fit a 306 inner cv to the 205 shaft and run that