GREEN DERV PROJECT FOR SALE

[karl1989]

just got my new drop links deliverd so fit them and prep for the m.o.t

[mark_airey]

Sorry I couldn't help more when Kyle rang, I was just going out...........However my first question pretty much was "are you sure the release fork is behind the bearing properly"

Hope all goes well with the MOT

[karl1989]

Sorry I couldn't help more when Kyle rang, I was just going out...........However my first question pretty much was "are you sure the release fork is behind the bearing properly"

Hope all goes well with the MOT

its ok mate. hoping all goes well and she passes

[karl1989]

well got the springs on today for the mot thanks to studturbo . was a bit of a pita but we did it. the old springs was dangerous suprised the didnt fail. who ever in barnsley did them did'nt give a f*ck. heres pics .

stu's car


one side out


now the bodge job :mad:






new drop links


now a tractor front end

[karl1989]

havent been any updates recently but there is some coming. got a FMIC coming next weekend for a offer i could'nt refuse. hopefully all will go well and i will be fitting it soon as i get it

[karl1989]

heres the fmic im getting. not the cleanest but will clean up lovely

[Matt]

Looks tidy that!

[karl1989]

think i will re-route the pipe work. not how i want it to be set up but ye its not bad

[Alee83]

Looks alright that pal! When's mot?

[karl1989]

Looks alright that pal! When's mot?

when i book it lol. still need to tighten hubs. havent been to do anything with the car for about 3 weeks.

[puglove]

Those spring were fu*kin rough. who ever done that should be shot

[karl1989]

Those spring were fu*kin rough. who ever done that should be shot

ano mate. worst part was i let the gf drive the car like that but i didnt know they was like that. anything could of happened.

[puglove]

Those spring were fu*kin rough. who ever done that should be shot

ano mate. worst part was i let the gf drive the car like that but i didnt know they was like that. anything could of happened.

Madness mate, why do it?? for the sake of £50 for some gmaxx 60mms

Whats the score with tis then mate? is it your now? studturbos old one?

[karl1989]

god knows. the lad that got the green 306 (my car) origionaly bought it with the suspension like that from barnsley about 3 years ago. he a mot tester didnt even tell the previous owner or me about them :evil: . im getting some springs for it that actually fit. the ones that was on didnt even need clamps to take the srings of they was no tension at all. no mate studturbo came over in his car to give me a hand thats all.

[karl1989]

well got the FMIC today. had a check and all looking good. needs a clean but im on it. also pipes have already been beaded and has been tapped into for the boost gauge . will be fitting this soon. also got a derv doctor dump valve with it so keep checking this thread .

[karl1989]

couple of pictures of the fmic.

cooler


inlet. will be cleaned up before fitted



dump valve



pipes

[karl1989]

well the fmic will be fitted at the weekend aslong as the weather stays nice. await pics people

[karl1989]

well the FMIC is on hold thanks to the yorkshire weather . try get it fitted tomorrow. managed to fit the track rod ends and get abit of copper grease on the brake lines before the rain started.

[karl1989]

UPDATE

well FMIC is on . well most of it. started of by arron_DT picking me up will rep when you comment mate. so anyway went over and cracked on with waht we could. did start to rain now and then but waited for it to stop . heres some pictures

FANS


NO FANS


BROKEN FANS

---

COOLER OFF



RANDOM BOSCH PIC


MANIFOLD UNBOLTED AND OUT
 



NEW MANIFOLD

---

SOME PIPES ON



PIN


LAST PIC. HOW THE COOLER WILL BE MOUNTED


All need to do now is cut the slam panel abit with a grinder to get the drivers side pipe up to the top and mount the cooler properly and she done .

comments welcome
cheers guys

[studturbo]

Good lad get it done pal

[karl1989]

I am dont worry

[karl1989]

ANOTHER UPDATE:

Well booked the day of today and finished the FMIC off. Need to sort the pipe coming from the turbo but it will be fine for now . Also have a leaky rad so need another . pictures here.

Got abit confused with the pipes abit on were they went


Passengers side that i had to sort so the pipe would go through

---

Drivers side was abit too tight but managed to sort it




I know the DV looks stupid now but it will be sorted



Cooler


Comments welcome people

[karl1989]

well my car is now on the database as insured . Booking MOT tomorrow. Also found a dturbo been broke so im taking the day of tomorrowim taking the radiator and fitting it that and also the morettes, maybe the the stainless exhaust so mine might be up for grabs.

[puglove]

Top job bud. I like looking at these pics gives me some options on how to do mine when it comes to it. Though id route the FMIC to inlet pipe slightly different.

Is there any reson from the inlet you couldnt turn the 90 down and go towards the right of the car behinde the Rad rather than across the top of the engine bay?

EDIT: Good work mate!

[karl1989]

Top job bud. I like looking at these pics gives me some options on how to do mine when it comes to it. Though id route the FMIC to inlet pipe slightly different.

Is there any reson from the inlet you couldnt turn the 90 down and go towards the right of the car behinde the Rad rather than across the top of the engine bay?

EDIT: Good work mate!

cheers mate. only reason its routed this way is because this is how i bought the kit so limited to other routes. need some more piping really so i can move it about

[puglove]

Ah right cool, was just checking, its hard to explian via writting but i think you could fit it the way im thinking with what you have.

Looking at the car from the front.

90* pipe from the inlet turn to face down.
Next 90* pipe to connect to that then turn right
Next 90* pipe turns out to the front and on to the cooler.

Looking at yours thats the way i think im going to do it but im going to use a STD manni adapter.

Good to hear it will be back on the road soon aswell, i do like this purly because you dont see many ph3's modded in this colour. (i Know its a ph2 but ph3 look) I would like to spray my 6 this colour for the fact that they never did them and its an OE colour.

[karl1989]

Ah right cool, was just checking, its hard to explian via writting but i think you could fit it the way im thinking with what you have.

Looking at the car from the front.

90* pipe from the inlet turn to face down.
Next 90* pipe to connect to that then turn right
Next 90* pipe turns out to the front and on to the cooler.

Looking at yours thats the way i think im going to do it but im going to use a STD manni adapter.

Good to hear it will be back on the road soon aswell, i do like this purly because you dont see many ph3's modded in this colour. (i Know its a ph2 but ph3 look) I would like to spray my 6 this colour for the fact that they never did them and its an OE colour.

ah i know what you mean mate. need some more hoses as mine are all straight. why dont you go for the manni i have?. meant to be better flow. cheers mate i was thinking of putting a ph2 bumper back on but not 100% sure yet. ye the colour is fairly rare id say.

[lolsteve]

Fmic before MOT, fantastic priorities aha glad to see it's progressing though hopefully will get to see it/help out with repairs when I come back up at end of aug

[karl1989]

Fmic before MOT, fantastic priorities aha glad to see it's progressing though hopefully will get to see it/help out with repairs when I come back up at end of aug

its got to look good for MOT lol. yeye let me no when you free mate. will meet up

---

car is booked for MOT on saturday at 9am . also got another radiator so going to fit that today and give the car a bath. pics up later

[karl1989]

well had a sh*t day. radiator was different so had to take it back to swap for another and they was all different. another 4 breakers yards and still no joy so had to get some bar leaks for a temp fix witch sorted it out. so having to go finish what i was meant to do tomorrow ready for saturday morning. will get pics up tomorrow