Steering rack ratios?
|
Steering rack ratios?
|
17-01-2016, 11:02 AM
Hi guys, ive just got myself a 98 306d, is there any differences in the steering rack between that and the gti one? Looking for a quicer ratio rack as the diesel one feels quite vague and to many turns lock to lock! Also other then discs is there much difference between the standard rear beam and the gti one?
GTi steering rack is rubbish for tight town streets or parking, massive turning circle to stop it fouling on the gearbox. Check your track rods and tracking for vagueness.
The torsion bars and anti-roll bar are much thicker on the GTi rear beam, as well as being around 30mm lower.
17-01-2016, 12:32 PM
Ah is it! Im going to be road rallying the car so was wondering if something off a different model would help rather then looking at the quick rack route. Suspension and steering bits are all good, just wanted to cut down number of lock-lock turns! Is the rear axle pretty much straight swap other then h/brake cables?
17-01-2016, 12:43 PM
Yeah rear axle is a straight swap, though you'll need to adjust brake lines to include a load compensator when changing to discs and as you say, handbrake cables as well.
I believe the Xsara VTS uses a quicker rack but I'll need someone to confirm that lol. 
Posts: 6,367
Threads: 87 Joined: Dec 2011 Reputation: 48 Location: South Yorks. Car Model/Spec: Rouge vallelunga 5 door Dturbo 
Thanks: 2
Given 74 thank(s) in 70 post(s)
17-01-2016, 01:31 PM
Xsara vts rack as said
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 19,854
Threads: 581 Joined: Dec 2011 Reputation: 195 Location: Bournemouth Car Model/Spec: Supercharged 306 GTi6 
Thanks: 36
Given 82 thank(s) in 78 post(s)
17-01-2016, 06:15 PM
Yeah VTS rack and in particular, a PH1 VTS. I believe the PH1 rack is 2.1 turns lock to lock and the PH2 is 2.4 lock to lock.
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft 
17-01-2016, 06:22 PM
xsara ph1 is 2.4 turns square drive ph2 2.6 turns with spline drive
90' 205 gti6 supercharged
05' Evo 9 IX GT Team eaton. Axle rebuilds please contact me for your needs. https://www.facebook.com/axlesbystef/ 
18-01-2016, 12:41 PM
Ph2 VTS rack is square drive as well Stef - it's the PAS unions that differ so you need the matching pipes from the Xsara as 306 ones won't fit.
It's ZX 16v that uses the spline drive quick rack AFAIK As said above though, if your current rack feels vague I'd suggest something is wrong as they're normally fairly precise.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
18-01-2016, 02:56 PM
my bad couldnt quite remember
90' 205 gti6 supercharged
05' Evo 9 IX GT Team eaton. Axle rebuilds please contact me for your needs. https://www.facebook.com/axlesbystef/
19-01-2016, 12:04 AM
Thanks guys will look into it? Vague probably not the best description, more number of turns comparec to my previous recent cars!
23-01-2016, 06:38 PM
Phaze 1 2.4 rack fits into original 6 if your using one with no mods apart from using the 6 Ram
Phaze 2 2.6 rack needs fitting mods on pipework 
Posts: 57
Threads: 12 Joined: Oct 2014 Location: istanbul Car Model/Spec: Ph-3 Diablo Gti-6
Thanks: 27
Given 0 thank(s) in 0 post(s)
04-04-2016, 08:27 PM
Hey guys who knows, Partner/Berlingo fitting ?
I searching vts ph1 but I can find But there are too many Partner/Berlingo Does anyone have any information about that? Partner/Berlingo Rack ? |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Power steering rack.....replacement options | Jellomanpie | 9 | 4,324 |
30-04-2020, 05:54 PM Last Post: Mighty306 |
|
| 306 PAS steering rack ratios | mattsrallye | 14 | 3,977 |
23-02-2017, 06:11 PM Last Post: Eeyore |
|
| Steering rack piston cover | doogle-d turbo | 2 | 1,528 |
10-07-2016, 04:19 PM Last Post: doogle-d turbo |
|
