Posts: 51
Threads: 7
Joined: Sep 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
Hi,
Ive got a 306 hdi estate and the rear beam is really stiff on one side only
The stiff side literally doesn't move so making the ride really hard (unbearable) over any type of bump / pothole.
From reading I can see this is probably down to worn trailing arm bearings? would this cause the axle to not move what so ever?
I was hoping that it would be a seized shock absorber, has anyone ever had the same symptoms from a seized rear shocker?
When I jack this side up the wheel doesnt move what so ever so dont really have to jack it very high.
The other side you have to keep jacking as the suspension is depressing.
Any help will be much appreciated.
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
beam is screwed. if its that siezed its probably done the cross tube in as well. either source a second hand beam or speak to stef on here. he rebuilds them for a budget cost for members only. and apparently does a cracking job.
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 732
Threads: 58
Joined: Feb 2013
Reputation:
0
Location: piggys mums
Car Model/Spec: v70r
Thanks: 0
Given 1 thank(s) in 1 post(s)
Have you tried the shock?
Posts: 1,252
Threads: 58
Joined: Jun 2014
Reputation:
5
Location: South west
Car Model/Spec: 205 gti6 supercharged
Thanks: 6
Given 16 thank(s) in 16 post(s)
I highly doubt its a shock not seen one thats just given up and seized worth unbolting one end and checking it moves tho.
Posts: 51
Threads: 7
Joined: Sep 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
I can confirm sadly that it is the trailing arm that is seized!! Could this axle still be rebuilt?
Posts: 1,252
Threads: 58
Joined: Jun 2014
Reputation:
5
Location: South west
Car Model/Spec: 205 gti6 supercharged
Thanks: 6
Given 16 thank(s) in 16 post(s)
With out pulling it apart or in this case beating it apart! you cant really say but as paul says its very unlikely
Posts: 875
Threads: 145
Joined: Mar 2014
Reputation:
5
Thanks: 54
Given 18 thank(s) in 17 post(s)
has some bugger welded the arm on that side?? how long you had the car?
Posts: 51
Threads: 7
Joined: Sep 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
Looking at getting a 2nd hand axle now.
Is there an easy way to tell if there f*cked whilst there off the car? Without stripping it right down? Thanks
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
Thanks: 3
Given 89 thank(s) in 88 post(s)
there is no way when its on the car either.