24-02-2014, 12:20 AM
Oops wrong Allie, Allie = Ladysteve . Although havent seen Alee for a while either, maybe a small meet is in order try and find some good driving roads now the weather seems to be getting a bit better
|
MG ZR: Cams & Maps
|
24-02-2014, 08:04 AM
Ye defo need a meet
Venetian XUD ph2 heaven
Ph3 perv cab heaven Black ph1 XUD died Moonstone hdi stage 2
24-02-2014, 06:17 PM
Venetian XUD ph2 heaven
Ph3 perv cab heaven Black ph1 XUD died Moonstone hdi stage 2 
24-02-2014, 06:31 PM
(24-02-2014, 06:17 PM)karl1989 Wrote:(24-02-2014, 05:33 PM)Alee83 Wrote: My ears are burning!! Not bad matey!! Long time no see... ![[Image: Sig3_zpscd005eb1.jpg]](http://i1099.photobucket.com/albums/g385/alee83/Sig3_zpscd005eb1.jpg)
24-02-2014, 09:16 PM
(24-02-2014, 06:31 PM)Alee83 Wrote:(24-02-2014, 06:17 PM)karl1989 Wrote:(24-02-2014, 05:33 PM)Alee83 Wrote: My ears are burning!! Ano mate been busy sorting unit and escort ect. Fancy a smooth front end on the rallye 
Venetian XUD ph2 heaven
Ph3 perv cab heaven Black ph1 XUD died Moonstone hdi stage 2
25-02-2014, 12:19 PM
(24-02-2014, 09:16 PM)karl1989 Wrote:(24-02-2014, 06:31 PM)Alee83 Wrote:(24-02-2014, 06:17 PM)karl1989 Wrote: Eyup how's it going dude Hey what ya got?
25-02-2014, 07:36 PM
(25-02-2014, 12:19 PM)Alee83 Wrote:(24-02-2014, 09:16 PM)karl1989 Wrote:(24-02-2014, 06:31 PM)Alee83 Wrote: Not bad matey!! Long time no see... Bonnet and grill smoothed just needs wrapping in red for your car?
Venetian XUD ph2 heaven
Ph3 perv cab heaven Black ph1 XUD died Moonstone hdi stage 2
25-02-2014, 07:43 PM
(25-02-2014, 07:36 PM)karl1989 Wrote: Bonnet and grill smoothed just needs wrapping in red for your car? Is it a phase 3 bonnet? Sorry for the thread hi-jack Steve... 
25-02-2014, 07:46 PM
Sure it is. Look at my forsale thread. Comments there
Venetian XUD ph2 heaven
Ph3 perv cab heaven Black ph1 XUD died Moonstone hdi stage 2 
Haha no worries Alee
Plans: -Currently looking into a gearstick UJ modification at the moment as the gearstick is quite sloppy so doesnt help for sporty shifts.  -Ordered galletto to get the map file off -Does anyone in the area have a torque wrench that goes to 10nm? Saves me buying one to use once for the cam ladder Question When pulling away sometimes it feels like it's wheel spinning but it's not, any ideas?
26-02-2014, 12:02 AM
That's what my first thought but the revs arn't going up and the speed isnt, its more like the shaking feeling of wheel spinning without the wheels spinning
Posts: 20,092
Threads: 591 Joined: Nov 2012 Reputation: 54 Location: Cotswolds Car Model/Spec: Stage 13 16v HDi 
Thanks: 22
Given 68 thank(s) in 68 post(s)
26-02-2014, 08:13 AM
Engine mounts knackered?
10nm is like little finger tight...be surprised if there is a torque wrench which is accurate to such a small amount Wishes for more power...
26-02-2014, 09:28 AM
You can buy mini torque wrenches that operate solely within that range and are no good for large torques.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
This is one that operates at that level, it just seems like alot for a one use thing but I dont want to go 'she'll be rit' when dealing with camshafts
http://www.ebay.co.uk/itm/DRAPER-3-8-ADJ...5d2b34f6d5 I'll give the engine mounts a shake later, would powerflex tighten it up without making the car unlivable? Don't quite understand the stiffer engine mount business Who changed the thread name!
Posts: 6,367
Threads: 87 Joined: Dec 2011 Reputation: 48 Location: South Yorks. Car Model/Spec: Rouge vallelunga 5 door Dturbo 
Thanks: 2
Given 74 thank(s) in 70 post(s)
26-02-2014, 01:46 PM
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
26-02-2014, 04:41 PM
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
26-02-2014, 04:55 PM
Love it...!
If you want me to borrow a torque wrench I can, but will have to let me know an exact time to get it as will need to be back at work... 
Definitely get a 6 not being biased or anything
![[Image: Cn91r40h.jpg]](http://i.imgur.com/Cn91r40h.jpg) Astor 6 Fast road/track project
26-02-2014, 07:01 PM
(26-02-2014, 01:46 PM)Mattcheese31 Wrote:yyyouuuuuuu! (26-02-2014, 04:55 PM)Alee83 Wrote: Love it...!Amazing cheers I'd only need it to put stuff back together so a day or two at most. Now just a case of getting it apart :/ (26-02-2014, 06:42 PM)7057sam Wrote: Definitely get a 6 not being biased or anythingNo chance, I hear those 6's and XUD's have terrible headgasket problems
26-02-2014, 07:32 PM
Cheers man appreciate it
 
26-02-2014, 11:40 PM
The injector bolts of my mercedes are supposed to be tightened to 7nm. I didn't know that when I did it. Or have a torque wrench so I just tightened them up loads which probably isn't ideal but oh well
Haha yeah ive been through 2 engine done 0 miles
I've found a guy who break axsara vts' s engine's are much lower mileage but yeah they a ticky time bomb I've seriously though about a civic type r ep3 getting cheap now under 2k easy. 197bhp with lsd with a few mods be as quick as a low boost Astor 6 Fast road/track project
27-02-2014, 05:51 PM
I could probably get away without a torque wrench but for piece of mind I'd like to have one so I don't overtighten or have cams fly off at 7k
Spent some time at the scrappy today hunting for a part to help solve the sloppy gearstick problem. 1 hour, several cuts and £10 later and we have ourselves a steering rack UJ to replace the gearbox UJ
Remmber going to the scrappy with mates after college every friday and checking every car for aftermarket door speakers
Astor 6 Fast road/track project
|
|
« Next Oldest | Next Newest »
|
![[Image: mcetg0.png]](http://i57.tinypic.com/mcetg0.png)
![[Image: Ty8kl7b.jpg]](https://i.imgur.com/Ty8kl7b.jpg)
![[Image: 205sig.jpg]](http://s1016.photobucket.com/user/stephenraymond606/media/205sig.jpg.html)
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html)
Users browsing this thread: 2 Guest(s)