31-01-2014, 10:05 PM
Fair enough, least its a known brand, and not made of toffee.. like some questionable trolley jacks
XUD TDT- Status = SELLING ALL THE BITS.
|
31-01-2014, 10:05 PM
Fair enough, least its a known brand, and not made of toffee.. like some questionable trolley jacks
31-01-2014, 10:09 PM
(31-01-2014, 10:05 PM)Dean Wrote: Fair enough, least its a known brand, and not made of toffee.. like some questionable trolley jacks Me "Doddy.. is the wheel on the jack supposed to be sideways?" You "huh?" Me "yeeeah.. its f*cked.. (I keep lifting).. Still works though" You "meh" Still works to this day.. True story. ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
31-01-2014, 10:37 PM
not just the wheel... the whole lifting mechanism goes sideways..
(31-01-2014, 10:37 PM)Dean Wrote: not just the wheel... the whole lifting mechanism goes sideways.. Still works Used this site :: http://www.random-science-tools.com/phys...s/tube.htm calculated the overall frame length added 2m on the top. Frame comes out at 44kg. .. Not bad. Add on engine.gear box. wheels, hubs. more linkages for steering ect.. seats..... 1.5" pipe 3mm wall. 17m of tube. some of would be 1 - 1.25 " pipe ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
31-01-2014, 11:01 PM
(31-01-2014, 09:41 PM)TallGuySmallBike Wrote: God no I dont have the patience .. I'd end up throwing it around the garage... as per. I'll put a tenner on man with angle grinder being faster than that tube notcher
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
31-01-2014, 11:03 PM
(31-01-2014, 11:01 PM)Rippthrough Wrote:(31-01-2014, 09:41 PM)TallGuySmallBike Wrote: God no I dont have the patience .. I'd end up throwing it around the garage... as per. Deal. Wait Make it the cost of the notcher... and Deal. ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
31-01-2014, 11:06 PM
Sweet, when you sending my cheque?
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
31-01-2014, 11:27 PM
...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
01-02-2014, 10:03 AM
Getting there with the frame. still needs cross members for strength.
And all the sizes are probs wrong lol. once i measure up the engine and seating pos i will crack on. What's the biggest width road tyre i should fit at the back i wonder? i was thinking a porsche rear wheel. ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
Are you going live rear axele'd too?!
Would be fapping epic!!! Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
01-02-2014, 11:56 AM
I have a spare seat
01-02-2014, 01:55 PM
(01-02-2014, 10:08 AM)Grant Wrote: Are you going live rear axele'd too?! 3 wheel drive? I dont know if i can? 4 wheel drive gearbox? mod the shaft.. Getting the ratio to 1:1 might be a pig? Putting idea in my head.. you bastar.d ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
01-02-2014, 02:15 PM
Just change the tyre size until the ratio is right
A moments silence please, for our brothers in the NAD-zone.
(01-02-2014, 02:15 PM)Martin306 Wrote: Just change the tyre size until the ratio is right Is there a 4 fwd gearbox that fits on to a XUD? Erm.. Fuel tank? ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
01-02-2014, 04:58 PM
(01-02-2014, 01:55 PM)TallGuySmallBike Wrote:(01-02-2014, 10:08 AM)Grant Wrote: Are you going live rear axele'd too?! From the AutoCad pic you put up, it looks like the rear wheels are connected with 1 'shaft' so as to speak. No differential or anything. Making it a live rear axle. Would be an epic drift trike :p but a PITA in normal driving haha Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
01-02-2014, 05:32 PM
Thats the front wheels, its a reverse trike
01-02-2014, 05:40 PM
Ah right, well now I'm lost. I'm guessing that front axle is not staying there then?
Member of the 99% warning or you're nothing club 2000 Moonstone 1.8 Meridian - Sold 2000 China 3dr XS - Dead 1998 Diablo 3dr XSI
I really should clear this up lol.
Bare with ok in the picture.. single wheel is the rear.. Front axle type thing was a reference point for me (oops) I'll upload pics of what i am buying off danny2009 tomorrow. "I'd be tempted to start with a whole front subframe..." I'm getting hubs, drive shafts, steering rack, engine, gbox, alt, starter, ect. making the wishbones ect.. 2 Wheels at the front. 1 at the rear. engine is in the front (small width of the frame) dual seat to sit 2 people ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
02-02-2014, 01:01 AM
Well, you could fit an LDV gearbox, then a transfer case from a 4x4, which can feed a diff at the front then drive to the rear.
A moments silence please, for our brothers in the NAD-zone.
02-02-2014, 10:07 AM
(02-02-2014, 01:01 AM)Martin306 Wrote: Well, you could fit an LDV gearbox, then a transfer case from a 4x4, which can feed a diff at the front then drive to the rear. I'm going to make it 2 fwd. then after its built and tested. i might mod it a little for rear wheel drive too lol ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
02-02-2014, 12:32 PM
What about rear engined front wheel drive, then you can brag about how much power it has because you can spin the wheels in 5th
A moments silence please, for our brothers in the NAD-zone.
02-02-2014, 07:44 PM
(02-02-2014, 12:32 PM)Martin306 Wrote: What about rear engined front wheel drive, then you can brag about how much power it has because you can spin the wheels in 5th I'd rather get around corners ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
02-02-2014, 07:44 PM
enough talking get building
(02-02-2014, 07:44 PM)306Dan Wrote: enough talking get building Give me a chance.. This is the view so far from the FRONT. Front engined ftw. Its now the correct height from the floor, and the right tilt (30 degrees?) so the top of the inlet flat spot is level to the floor [attachment=13285] Mock up of seating position [attachment=13288] ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
03-02-2014, 10:10 PM
Parts needed :
Fuel pump. Injectors. Starter. ...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
Finished!
...85cc Petrol 0 Doors... - ...135MPG... - ...£17 Tax...
06-02-2014, 10:13 PM
You put the steering wheel in the wrong side you dope :p
06-02-2014, 10:24 PM
Nice! except that trike is rear wheel drive do not want.
A moments silence please, for our brothers in the NAD-zone.
|
« Next Oldest | Next Newest »
|