Posts: 684
Threads: 58
Joined: Dec 2012
Reputation:
3
Location: Fordingbridge
Car Model/Spec: Loads
Thanks: 1
Given 9 thank(s) in 9 post(s)
21-01-2014, 07:08 PM
(This post was last modified: 21-01-2014, 10:34 PM by miles.)
Old stock clearance before the fully on car adjustable rods come online to follow my current range of on car fully adjustable rods.
These are pictured below.
Spec for these sets will be, M8 rod is the normal right hand threaded type where you need to remove it to adjust it.
The 2 smaller M6 rods use Left if 10 people buy then the price will be £32.00 delivered which is £10.50 off list price,
15 people and it would be £30.00 per set. Can also include 106 rods in this
Please do not confuse these with the cheaper sets you see on Ebay which generally are threaded bar and heat shrink which are no where near as strong as these,
If it's in the wrong section then sorry
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Thanks: 0
Given 0 thank(s) in 0 post(s)
Baker ones cost that much and theres a group buy for them going on at the moment. When i saw the words clearance i thought that ment stuff going cheap. Drop them to 20quid posted, will fly out the door then
Doesnt even own a 306.
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
(21-01-2014, 07:40 PM)Tom Wrote: Baker ones cost that much and theres a group buy for them going on at the moment. When i saw the words clearance i thought that ment stuff going cheap. Drop them to 20quid posted, will fly out the door then
+1 on that.
Posts: 6,482
Threads: 226
Joined: Dec 2011
Reputation:
24
Location: Cornwall
Car Model/Spec: A3 TDi
Thanks: 0
Given 0 thank(s) in 0 post(s)
Not trying to be a dick or anything, just from a buyers point of view, theres nothing clearance about that.
Doesnt even own a 306.
Posts: 8,019
Threads: 374
Joined: Dec 2011
Reputation:
38
Location: Isle of Wight
Car Model/Spec: GTI 6
Thanks: 8
Given 16 thank(s) in 14 post(s)
(21-01-2014, 07:41 PM)SRowell Wrote: (21-01-2014, 07:40 PM)Tom Wrote: Baker ones cost that much and theres a group buy for them going on at the moment. When i saw the words clearance i thought that ment stuff going cheap. Drop them to 20quid posted, will fly out the door then
+1 on that.
Oui
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
+1 again...I didnt wana say but £40 I thought was the normal price?!
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Guys we don't need to fill his thread with rubbish about how these are over priced. People will make their own minds up and buy from him if they decide they want to.
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 684
Threads: 58
Joined: Dec 2012
Reputation:
3
Location: Fordingbridge
Car Model/Spec: Loads
Thanks: 1
Given 9 thank(s) in 9 post(s)
Thank you, As in the listing if 10 people buy then the price will be in effect £32.00 delivered which is £10.50 off list price,
15 people and it would be £30.00 per set.
Will re-word it now to make it clearer
I could make them cheaper but the Left and right hand thread puts the price up a fair amount, If I used the old threaded bar way they would be £20.00 but I'm not into selling something I wouldn't use myself.
Come with 2 years warranty as well on the ball joints and rods.
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
Sounding better
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
(22-01-2014, 06:48 AM)Poodle Wrote: Just an fyi for anyone who hasn't dealt with Miles before: he'll charge £5 more than he says he will, despite confirming the price with him over the phone as he was taking payment. Then the linkages won't be sent out and he will require chasing up 6 weeks later, at which point he will question your honesty and insist he has proof of postage (which never turned up, amazingly). I queried the over-charging during this second line of messaging and was duly ignored.
i can see you have had a personal problem with Miles, i'm going to leave this here and let him speak for himself and see what happens but let's please keep it civil . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 1,058
Threads: 18
Joined: Jan 2014
Reputation:
10
Location: Wiltshire
Car Model/Spec: 3 x 205 GTi & 306 HDi
Thanks: 3
Given 17 thank(s) in 17 post(s)
To counter Poodle's viewpoint, I've had many dealings with Miles over the years, both for my own car and for friends cars that I help look after, and I've nothing but praise for both his workmanship and products.
Believe me there are many shysters in the Peugeot parts business - but Miles is not one of them.
FWIW I've been running a set of Miles's linkages on my 205 for the last few years and they continue to work well.
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
Posts: 7,347
Threads: 163
Joined: Dec 2011
Reputation:
53
Location: Leeds
Car Model/Spec: 406 HDI
Thanks: 0
Given 18 thank(s) in 15 post(s)
Got to say, bought some springs and shocks off Miles last week and besides a slight issue with delivery that wasn't his fault the service was good and the parts are what I wanted.
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
Perhaps I was unlucky, but as a first impression it didn't bolster my confidence. In fairness the linkages themselves are top quality and I would recommend them were it not for the poor service I received.
Posts: 684
Threads: 58
Joined: Dec 2012
Reputation:
3
Location: Fordingbridge
Car Model/Spec: Loads
Thanks: 1
Given 9 thank(s) in 9 post(s)
Poodle; For any message's my work email is by far the best as I read them daily, Forum's are in the Eve's and until one of the mod's turned on my message notification here I didn't come on here a great deal until recently, Anyone can give me call as I think I'm easy to get in touch with and how many companies can you deal with in the eve's abit via Email, Must make me MAD I think.
I sell 1000's of items per year and I have to ask no matter what for delivery details as I can then trace via my invoice's to the postage method and tracking number to check up on. The post office is always a nightmare for this and to the extent if and when something goes missing I don't even bother claiming now it's that painful and then there insurance means I loose out as I don't get the retail price only my buy price.
As much as I like to keep everybody happy it doesn't always work, We all have good and bad experience's from time to time for various reason's as we are only human and can only try our best which on this occasion wasn't good enough so I can only say Sorry and if you do need anything else I can offer you a good discount. Hopefully cannot say fairer than that and let's get the topic back on track
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
(22-01-2014, 09:54 PM)miles Wrote: and until one of the mod's turned on my message notification here I didn't come on here a great deal until recently,
That will be a setting in your User CP in the top left of the page mate
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
Seems i'm out of line, my apologies, Miles. Could a mod delete the comment please.
Posts: 684
Threads: 58
Joined: Dec 2012
Reputation:
3
Location: Fordingbridge
Car Model/Spec: Loads
Thanks: 1
Given 9 thank(s) in 9 post(s)
You can see I'm good at this Forum stuff, Give me a car anyday
Overall Road Going Production Class Winner at BARC Gurston Down Speed Hillclimb 2012, 2013 & 2014 With a class record along the way (For a while), Taking 2nd place will be Ian Redding's 306 GTi
2016 Castle Combe GT championship class winner
Posts: 2,607
Threads: 136
Joined: Jun 2013
Reputation:
11
Location: Basingstoke/Reading
Car Model/Spec: 306 hdi stage 2 & 205 DTI
Thanks: 6
Given 39 thank(s) in 39 post(s)
Had loads and loads of engine work done and parts off Miles, can't fault the bloke and he's regularly gone out his way to help me.
The best bloke on the Peugeot scene to deal with!
|