| 
		
	
	
	
		
	Posts: 18,242 
	Threads: 386 
	Joined: Dec 2011
	
 Reputation: 
87 Location: Suffolk
 Car Model/Spec: Focus Titanium
 Thanks: 1Given 118 thank(s) in 117 post(s)
 
 
	
		
		
		20-09-2013, 06:26 PM 
(This post was last modified: 20-09-2013, 06:30 PM by Toms306.)
	
	 
		 (20-09-2013, 04:35 PM)Niall Wrote:  Original gti cat is about £380 so thats stupidly expensive unless they have one of them silly twin cat things (doubt it at that age) 
Hmm, just checked servicebox....  1.8 16v cat £700 + vat....  GTi cat is only £560 + vat oddly!
 
ZRs do use two cats, but the top one (on the mani) isn't a 'proper' cat.  The scrappy don't give much for it anyway!
	 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		 (20-09-2013, 06:09 PM)Jimmyboycheck Wrote:  Imo gearbox ratio plays a big part. I think you need to look at a 6 speed conversion plus power or a fair bit of power alone around the 200 mark Don't know of any 6 speed options for this engine though :/
  (20-09-2013, 06:16 PM)Anton Wrote:  Do they have a close ratio box? I had the same engine in a Coupe and it wasnt. 
 1st=40mph
 2nd=70mph
 3rd=100mph
 4th=125mph
 
Apparently so in the adverts, think it was part of the whole zr is sports model. Since the steering rack is different so the turning circle is a pile of wank 
Yours would have been a 143 engine no?
	 
		
	 
	
	
	
		
	Posts: 1,441 
	Threads: 48 
	Joined: Dec 2011
	
 Reputation: 
5 Location: Woodstock, Oxford
 Car Model/Spec: Peugeot 306 S16 Cossack
 Thanks: 9Given 2 thank(s) in 2 post(s)
 
 
	
	
		Yeah it was, but honestly not that much different.....
	 
Peugeot 206 GTI HDIVolvo V50 2.0d
 Volvo XC90 D5
 
 
 
 
 
 
 
 
 
		
	 
	
	
	
		
	Posts: 3,688 
	Threads: 27 
	Joined: Dec 2011
	
 Reputation: 
20 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		Don't mean to offend bud! But I don't think ιt will ever be what the title of the thread is!, I have been in a couple of these ɑnd I don't think they are anywhere near claimed power, ɑnd puttting a stock 6 next to a stock one of these, handling wise ιs ludicrous, ιts a nice car don't get me wrong!! But Barry mcguigan would never beat Tyson
	 
		
	 
	
	
	
		
	Posts: 3,377 
	Threads: 96 
	Joined: Dec 2011
	
 Reputation: 
7 Location: Brizzel
 Car Model/Spec: 306 tractor
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		 (20-09-2013, 07:13 PM)Jonny b Wrote:  Barry mcguigan would never beat Tyson 
He would if Tyson's arms were tied    
They're not that quick really, I had a non turbo one before I strapped the turbo on and I wasn't impressed..with a turbo though...wow!
	 
![[Image: siggy1.jpg]](http://i653.photobucket.com/albums/uu252/crissy_boy/Cars/siggy1.jpg) the smokey old bus that sounds like a tractor... 
		
	 
	
	
	
		
	Posts: 4,566 
	Threads: 102 
	Joined: Dec 2011
	
 Reputation: 
9 Location: Sunderland
 Thanks: 60Given 14 thank(s) in 14 post(s)
 
 
	
		
		
		20-09-2013, 07:32 PM 
(This post was last modified: 20-09-2013, 07:44 PM by procta.)
	
	 
		 (20-09-2013, 06:44 PM)Anton Wrote:  Yeah it was, but honestly not that much different..... 
correct, the "160" block is stronger than the 143 block, I think its either the head, pistons or the valves.  
also the ecu is different and the injectors. more to do with the emissions.
 
  (20-09-2013, 06:06 PM)lolsteve Wrote:  Procta leave the posh rover 200 alone  we don't all want to crumple up into a tin can when we crash *cough* metro *cough* 
steve i think iam gonna piss on your bombfire here, 
https://www.youtube.com/watch?v=my6nnePPzDY 
these are 1.4 16v metros by the way. catching a few posh 160 bhp rover 200s     
so the shell is still at fault    
		
	 
	
	
	
		
	Posts: 10,864 
	Threads: 117 
	Joined: Dec 2011
	
 Reputation: 
119 Location: Southampton
 Car Model/Spec: 306 HDi and friends
 Thanks: 13Given 106 thank(s) in 106 post(s)
 
 
	
	
		I think that's decided it tbh Steve, turbo it is.
	 
		
	 
	
	
	
		
	Posts: 1,441 
	Threads: 48 
	Joined: Dec 2011
	
 Reputation: 
5 Location: Woodstock, Oxford
 Car Model/Spec: Peugeot 306 S16 Cossack
 Thanks: 9Given 2 thank(s) in 2 post(s)
 
 
	
	
		This is really bugging me ha. Want to go out in to see how it is. 
 Been looking at stats and this weighs the same as my Rover Coupe, in standard form they are known to do 0-60 in the low 7's. I was always under the impression that the 143's made a bit more and the 160's made a bit less. Not much difference in them at all...
 
Peugeot 206 GTI HDIVolvo V50 2.0d
 Volvo XC90 D5
 
 
 
 
 
 
 
 
 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
		
		
		21-09-2013, 10:05 AM 
(This post was last modified: 21-09-2013, 10:07 AM by lolsteve.)
	
	 
		 (20-09-2013, 07:13 PM)Jonny b Wrote:  Don't mean to offend bud! But I don't think ιt will ever be what the title of the thread is!, I have been in a couple of these ɑnd I don't think they are anywhere near claimed power, ɑnd puttting a stock 6 next to a stock one of these, handling wise ιs ludicrous, ιts a nice car don't get me wrong!! But Barry mcguigan would never beat Tyson That's why I've picked the 6' to go up against, as standard the 306 is a pretty good all rounder and I wanted to see if with some suspension/chassis work I could get the brit to beat his French rival. for example the additional rear anti roll bar and looking into seeing if I can use the uni lab for machine work. As I say in terms of power it's going to have to be the rolling road day to see what it's pushing, if it is the claimed power I have no idea what i'd do.
  (20-09-2013, 07:17 PM)devils_fuel Wrote:   (20-09-2013, 07:13 PM)Jonny b Wrote:  Barry mcguigan would never beat Tyson He would if Tyson's arms were tied
  
 They're not that quick really, I had a non turbo one before I strapped the turbo on and I wasn't impressed..with a turbo though...wow!
 Was that the t series engine? or did you turbo a k series? 
  (20-09-2013, 08:58 PM)Poodle Wrote:  I think that's decided it tbh Steve, turbo it is. 
I would love to but hearing a lot of people saying that turboing a k series is a lot of work when you could just swap out and put in a t series turbo. That and I'm interested in the vvc system if I could get it to keep working despite the extra power it would be fun to show up a tyre r and his veeeeteeecccc. Although we know that will never happen
 
  (20-09-2013, 07:32 PM)procta Wrote:   (20-09-2013, 06:44 PM)Anton Wrote:  Yeah it was, but honestly not that much different..... correct, the "160" block is stronger than the 143 block, I think its either the head, pistons or the valves.
 also the ecu is different and the injectors. more to do with the emissions.
 
 
  (20-09-2013, 06:06 PM)lolsteve Wrote:  Procta leave the posh rover 200 alone  we don't all want to crumple up into a tin can when we crash *cough* metro *cough* steve i think iam gonna piss on your bombfire here,
 
 https://www.youtube.com/watch?v=my6nnePPzDY
 
 these are 1.4 16v metros by the way. catching a few posh 160 bhp rover 200s
   so the shell is still at fault
  
can a crisp packet catch up to a brick basically?    the posh 200 shell is at fault but its so darn comfy I cant give it up
	 
		
	 
	
	
	
		
	Posts: 4,566 
	Threads: 102 
	Joined: Dec 2011
	
 Reputation: 
9 Location: Sunderland
 Thanks: 60Given 14 thank(s) in 14 post(s)
 
 
	
	
		I will give you at its more comfy.
	 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		Bit of an update: 
Nothing new added but currently working on designing rear strut brace/ sourcing a rear arb. Just trying to get the university labs to make me a bracket without admitting it's not a uni project. 
And also in regards to the lack of power it could be due to the discovery of having a 56mm throttle...which is from a t series turbo engine. 
It seems that bigger is not better and changing the 52mm throttle to a 56mm causes high end power loss and apparently if you open the throttle fully you have less acceleration than when 3/4 open. on power graphs people claim it kills the power heavily after 6k rpm whereas the 52mm holds strong til limiter 
The only benefit people seem to claim is more torque below 2k but then im never down that low so I won't miss it   
		
	 
	
	
	
		
	Posts: 1,441 
	Threads: 48 
	Joined: Dec 2011
	
 Reputation: 
5 Location: Woodstock, Oxford
 Car Model/Spec: Peugeot 306 S16 Cossack
 Thanks: 9Given 2 thank(s) in 2 post(s)
 
 
	
	
		Oh dear, heard the story so many times!
	 
Peugeot 206 GTI HDIVolvo V50 2.0d
 Volvo XC90 D5
 
 
 
 
 
 
 
 
 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		with people putting on 56 throttles?
	 
		
	 
	
	
	
		
	Posts: 1,441 
	Threads: 48 
	Joined: Dec 2011
	
 Reputation: 
5 Location: Woodstock, Oxford
 Car Model/Spec: Peugeot 306 S16 Cossack
 Thanks: 9Given 2 thank(s) in 2 post(s)
 
 
	
	
		Yeah. The 160 had a slightly larger body than the 143 so people upgraded it. Only added like 1-2bhp but throttle response improved.
 Then all the chavs in their ZR's started changing to the turbo body and it was proven to actually lose power. Search around but theres a guy who tested all three back to back.
 
Peugeot 206 GTI HDIVolvo V50 2.0d
 Volvo XC90 D5
 
 
 
 
 
 
 
 
 
		
	 
	
	
	
		
	Posts: 7,152 
	Threads: 130 
	Joined: Jan 2012
	
 Reputation: 
82 Location: Kingston
 Car Model/Spec: 106 GO-NAD
 Thanks: 0Given 0 thank(s) in 0 post(s)
 
 
	
	
		So, all this effort to try and beat a '6, while not beating a '6 yet....
 and while looking like, well, an MG driver...
 
 When you buying a '6?
 
Member of the 99% warning or you're nothing club
 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		 (30-09-2013, 03:22 PM)Anton Wrote:  Yeah. The 160 had a slightly larger body than the 143 so people upgraded it. Only added like 1-2bhp but throttle response improved.
 Then all the chavs in their ZR's started changing to the turbo body and it was proven to actually lose power. Search around but theres a guy who tested all three back to back.
 Yea, hoping to get a 52mm in time for the rolling road day. Might see if I can do a run with it on and one with the 56mm see the difference. 
  (30-09-2013, 03:29 PM)samass Wrote:  So, all this effort to try and beat a '6, while not beating a '6 yet....
 and while looking like, well, an MG driver...
 
 When you buying a '6?
 
Never, don't get me wrong the 306 is a nice car but ..I'm just bored of them, dull interior and that. Really didn't put a smile on my face when driving the hdi, maybe a gti6 would be different but i'd rather try something else. maybe a type r...
 
But don't you worry sam, this will beat a gti6. After all I managed to overtake poodle at combe ;D
	 
		
	 
	
	
	
		
	Posts: 4,566 
	Threads: 102 
	Joined: Dec 2011
	
 Reputation: 
9 Location: Sunderland
 Thanks: 60Given 14 thank(s) in 14 post(s)
 
 
	
	
		steve, you need to change the shell! I have told you that many a time, The posh 25 just isn't up to the power of the vvc    what you need is a proper rover    like what I have   
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		The shell stays. May bot he a proper rover but id prefer if i wasn't so involved in being a crumple zone if i crash    
I am contemplating making it more lightweight in the future , thanks to some pushong from ladystee to make it more race car
	
		
	 
	
	
	
		
	Posts: 4,566 
	Threads: 102 
	Joined: Dec 2011
	
 Reputation: 
9 Location: Sunderland
 Thanks: 60Given 14 thank(s) in 14 post(s)
 
 
	
	
		 (01-10-2013, 11:50 AM)lolsteve Wrote:  The shell stays. May bot he a proper rover but id prefer if i wasn't so involved in being a crumple zone if i crash  
 I am contemplating making it more lightweight in the future , thanks to some pushong from ladystee to make it more race car
 
That's the 80s and 90s for you    
the mgcc is at Snetterton this weekend.
	 
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
	
		 (30-09-2013, 03:29 PM)samass Wrote:  So, all this effort to try and beat a '6, while not beating a '6 yet....
 and while looking like, well, a old man in a rover driver...
 
EFA    
there isnt much flow difference between 80/100% open anyway with the butterfly, so makes sense that the high flowing engine doesnt want such a huge intake.
 
same with exhausts, too fat and you get good low down grunt, but tend to kill top end speed/power
	 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		 (01-10-2013, 12:37 PM)procta Wrote:   (01-10-2013, 11:50 AM)lolsteve Wrote:  The shell stays. May bot he a proper rover but id prefer if i wasn't so involved in being a crumple zone if i crash  
 I am contemplating making it more lightweight in the future , thanks to some pushong from ladystee to make it more race car
 That's the 80s and 90s for you
   the mgcc is at Snetterton this weekend.
 Ah so much going on this weekend, too far though sadly. would be near £70 in fuel for me     (01-10-2013, 12:50 PM)Piggy Wrote:   (30-09-2013, 03:29 PM)samass Wrote:  So, all this effort to try and beat a '6, while not beating a '6 yet....
 and while looking like, well, a old man in a rover driver...
 EFA
  
 there isnt much flow difference between 80/100% open anyway with the butterfly, so makes sense that the high flowing engine doesnt want such a huge intake.
 
 same with exhausts, too fat and you get good low down grunt, but tend to kill top end speed/power
 
Yea, low down grunt is nice and all but the k series is a revvy lil bastard that enjoys bouncing off the limiter. like a kid pumped on up e number jumping on a fat chick .. or something
	 
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
	
	
		
	Posts: 10,864 
	Threads: 117 
	Joined: Dec 2011
	
 Reputation: 
119 Location: Southampton
 Car Model/Spec: 306 HDi and friends
 Thanks: 13Given 106 thank(s) in 106 post(s)
 
 
	
	
		Flol, stop poncing and get it mapped already. :p
	 
		
	 
	
	
	
		
	Posts: 20,092 
	Threads: 591 
	Joined: Nov 2012
	
 Reputation: 
54 Location: Cotswolds
 Car Model/Spec: Stage 13 16v HDi
       Thanks: 22Given 68 thank(s) in 68 post(s)
 
 
	
	
		supercharged.. then mapped
	 
		
	 
	
	
	
		
	Posts: 902 
	Threads: 31 
	Joined: Oct 2012
	
 Reputation: 
4 Location: directly above the center of the earth
 Car Model/Spec: tu5 bitza/cherry dt
 Thanks: 2Given 5 thank(s) in 5 post(s)
 
 
	
	
		Just drop a k series turbo in it, £250 mapping from z and f and your looking around 195 - 200 bhp ( although mine ran 190bhp but I pulled the engine out of a high miler)
	 
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		The crowd are demanding a remap then    just seems so expensive when compared to the hdi mapping of £60 or whatever 
 
Engine swaps aren't ideal for me since I have a communal parking space this year and a tight budget since my landlord asked for 6 months worth of rent in one go   
		
	 
	
	
	
		
	Posts: 8,298 
	Threads: 289 
	Joined: Nov 2011
	
 Reputation: 
92 Location: London
 Car Model/Spec: Phase 17 R26
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
		Then it's settled, strip it to f*ck   
		
	 
	
	
	
		
	Posts: 3,467 
	Threads: 186 
	Joined: Mar 2012
	
 Reputation: 
38 Location: Manchester 
 Car Model/Spec: MG ZR VVC
 Thanks: 3Given 21 thank(s) in 19 post(s)
 
 
	
	
		  
Ladysteve has been telling me to get buckets and strip it out for a little while now..
	 
		
	 
	
	
	
		
	Posts: 8,298 
	Threads: 289 
	Joined: Nov 2011
	
 Reputation: 
92 Location: London
 Car Model/Spec: Phase 17 R26
 Thanks: 0Given 1 thank(s) in 1 post(s)
 
 
	
	
	
		
	Posts: 1,441 
	Threads: 48 
	Joined: Dec 2011
	
 Reputation: 
5 Location: Woodstock, Oxford
 Car Model/Spec: Peugeot 306 S16 Cossack
 Thanks: 9Given 2 thank(s) in 2 post(s)
 
 
	
	
		Not worth remapping...
	 
Peugeot 206 GTI HDIVolvo V50 2.0d
 Volvo XC90 D5
 
 
 
 
 
 
 
 
 
		
	 |