Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
23-04-2013, 07:52 PM
(This post was last modified: 05-11-2013, 10:35 PM by Ben.)
I have my orougan wheels up for sale. I painted them gloss black around 18 months ago, and they do now have paint chips where I've been careless with sockets when removing wheels. A couple of them also have slight kerbing, but its only very light. They need a very good clean! I haven't had time to do it but I have cleaned a little bit to make sure the dirt comes off.
The tyres are all goodyear eagle F1's, with very good tread on the back but only a mm or so over the limit on the front.
The front wheels could do with balancing again as the steering wheel starts to vibrate slightly when I reach 70, but the tyres could do with replacing anyway.
Looking for £120 ONO for these.
Ben
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
10-05-2013, 11:10 AM
(This post was last modified: 10-05-2013, 11:11 AM by Ben.)
Bump!
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
(10-05-2013, 10:13 PM)SRowell Wrote: £175? D:
175 ono yeah, I thought that was pretty reasonable considering the rear tyres are so good, and they are 100 each new.
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
How much for just the 6x9's?
Welding and fabrication projects undertaken, contact me for more information.
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Posts: 122
Threads: 15
Joined: Mar 2013
Reputation:
0
Location: north wales
Car Model/Spec: moonstone 306 hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
How much for the shelf on its own posted ?
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
Bring the speakers to ppc if you can, might have them off you. You'll have to come and remind me though!
Welding and fabrication projects undertaken, contact me for more information.
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Bump. Wheels still here. Offers??
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Posts: 340
Threads: 33
Joined: Jun 2012
Reputation:
2
Location: Shrewsbury
Car Model/Spec: 306 D-turbo/306 Rallye
Thanks: 0
Given 0 thank(s) in 0 post(s)
would of had these if you weren't the other side of the country
Blaze '6 and Blaze D-turbo!
Posts: 436
Threads: 89
Joined: Oct 2013
Reputation:
0
Location: Near Yeovil Somerset
Car Model/Spec: 306 d turbo china blue
Thanks: 0
Given 1 thank(s) in 1 post(s)
Where are you located mate?
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Yeah I am a bit out of most peoples way. I'm in Norwich.
Posts: 4,660
Threads: 343
Joined: Jul 2012
Reputation:
15
Location: Chesterfield
Car Model/Spec: 106 gti / 306 hdi estate
Thanks: 4
Given 3 thank(s) in 3 post(s)
Just out of interest did you need spacers to fit these to your 306? or were they just bolt on?
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
You don't need spacers on the front, and you don't on the back either if your beam is VERY good. I needed 5mm spacers on the back due to slight beam camber, but I ran 20mm instead because it sat the wheel nicely in the arch.
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Posts: 22
Threads: 1
Joined: Dec 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
Can you post these? Cheers
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
Thanks: 3
Given 89 thank(s) in 88 post(s)
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
29-12-2013, 05:23 PM
(This post was last modified: 29-12-2013, 05:25 PM by Ben.)
(28-12-2013, 03:50 PM)Newlands Wrote: Can you post these? Cheers
I don't mind packaging them if you would like to arrange a courier to pick them up.
(28-12-2013, 04:12 PM)welshpug Wrote: are they ET20 or 28?
Not sure how I would tell? Are there two types of orougan's then?
Posts: 3,539
Threads: 42
Joined: Mar 2012
Reputation:
28
Thanks: 3
Given 89 thank(s) in 88 post(s)
There's 4,
14", 15",
16" ET20 and 16" ET28.
you tell by looking at the numbers on the back,
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Oh ok, I thought all that was on the back was 'Orougan'. I won't get a chance to look until the 2nd or 3rd, but I will get back to you.
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
It says 28 on the back so I assume that's the et.
Unforntunatly I have noticed a flat spot on one of the wheels. Its about 30mm long and on the inside of the wheel. Still holds its air fine though.
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
I thought orougans were et20 and nimrods were et28??
Member of 99% warning or your nothing club!
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
(03-01-2014, 07:23 PM)puglove Wrote: I thought orougans were et20 and nimrods were et28??
I don't know, never looked into it. All four of these have Orougan written on the back, and underneath where it says 6.5j it says '4 - 28'. It doesn't say 'et' or '20' anywhere so I assume that '28' is the et.
Posts: 112
Threads: 24
Joined: Nov 2013
Reputation:
0
Location: N warks
Car Model/Spec: 306 hdi stage 2
Thanks: 0
Given 0 thank(s) in 0 post(s)
How much for the wheels if I can pick them up the weekend maybe ???
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
04-01-2014, 06:46 PM
(This post was last modified: 04-01-2014, 06:47 PM by Ben.)
(03-01-2014, 11:44 PM)Donkeybubles Wrote: How much for the wheels if I can pick them up the weekend maybe ???
Price is 120, but you can make me an offer. I'm working nights this weekend so unfortunately collection would have to be between about 3pm and 9pm tomorrow. Failing that sometime during the week would be do-able.
Ps. Probably won't be on here again today, so ill pm you my number incase you want to text.
Posts: 1,220
Threads: 136
Joined: Dec 2011
Reputation:
2
Location: Norwich
Car Model/Spec: Phase 2 Dturbo
Thanks: 1
Given 1 thank(s) in 1 post(s)
Still for sale. Would also be interested in a swap for some 15 inch wheels
Posts: 283
Threads: 25
Joined: Oct 2013
Reputation:
0
Location: Wiltshire
Car Model/Spec: phase 3 hdi
Thanks: 1
Given 0 thank(s) in 0 post(s)
Really want a set of these I have some cyclones but need a refurb. Was going to do it but id rather another set of wheels to be honest.
|