GREEN DERV PROJECT FOR SALE

[karl1989]

Yes! Someone finally not doing a tdo4 for once, mate has his a t25 off a landy and bolts into the hot side of a t2 to make a hybrid now it keeps up with my 6 but looses puff at 125

nice. i have 2 spare T2's

also removed the T2 tonigh so the T25 will be on tomorrow

[karl1989]

T25 is fitted but still boosting 20psi. is smoking more than the T2 was. i can feel a difference but not much. also got my brembo rear disks and cables for axle . just waiting on calipers doing then axle should be done by next weekend

[karl1989]

if anyone fancys taking a look at my car to sort my power feel free to say . will travel to get this sorted as my mind it going blank

[Pompey306mark]

What t25 is it? Off what car? Did you take the numbers off it?

When is it smoking more? What pump you using? 9/10/11mm

[karl1989]

im not sure what its off i got it of Jenkosowls it was pulling 170+ when he had it so i know its got the power just something on mine thats wrong . 2.5-3k i think. im on a 9mm

[Jenkosowls]

Just bring it up to mine Karl

[karl1989]

ye im guna have to mate. wound the fueling back and made 14 psi so upped it more it seemed better but feels same again. seems at 3k-3.5k the rev gauge flys accross .


also got some HDI rods for the D8A

[karl1989]

bought a few bits today for the old girl. some more crystals, battery and some clones . clones will be on so i can refurb the vortex all at once. will upload pics when fitted. full day on sorting car saturaday

[Arron]

Sounds sweet dude i'll try catch up with you at the weekend. Nice one for helping with the droplinks

[karl1989]

with having a diesel leak today i thought i better change the top half of the pump. 1st time doing it so messing with the gov cradle was abit of a bugger had to ring a fellow member but got it back together but fecked my accelerator up 1st wouldnt rev 2nd go reved right up so trial and error i have like half use of my throttle so will try get it sorted tomorow as ive only got 10psi now .

[karl1989]

Sorted the throttle now so i have POWERRRR . Also i have been refurbing 2 of my vortex's alot on sanding but got a sander tonight omg done about 3 hours of sanding in 30mins . Also should be getting my GTI brake setup tomorrow or saturday so will be fitting them. Will add pictures when the wheels and brakes are done.

[Alee83]

Yey....! Getting some progress...

[karl1989]

Yey....! Getting some progress...

came to see you earlier but you wasnt in, had to show you some this from today


well done a wheel today. not the best job in the world. the wheels have some deep scratches so will have to be filled but me being impatient i started to paint. heres the worst wheel




sanded after ages and ages



primer



paint and laquer . tyre needs changing thats why i left it on

[Danny2009]

It's coming on now mate

[karl1989]

just bought these today. not sure if im going to fit them or just flog them on. in need of a refurb. there 14" so abit small 16" would have been ideal

[karl1989]

parcel arrived yesterday what could this be





decided id give them a quick clean before it got dark to i can paint them. here how i got on









will tackle rest of the rust tomorrow

[karl1989]

fitted the GTI brakes now just need the calipers sorting for the axle

few pics

sliders. snapped a bolt in one but got it out with FIRE al cleaned up now



old brakes




old vs new



fitted. better

[karl1989]

well got offerd a 2.0 cabbie last night. ended up getting it quite cheap with only 63000 on it. tax and tested. plans sort out a few bits then sell it. few piccys









i do have a spare XUD engine

[Tyronnster]

Actually like them wheels

[Sambarker]

Selling wheels off cabby?

[karl1989]

Ye the wheels will be for sale

[karl1989]

Well haven't updated for a while. Got the disk beam on and it's sitting to high. Also my pump has eaten the govner so got another Bosch. Will be fitted tomorrow and see how much boost I get now . Pictures be up tomorrow

[karl1989]

Not had time to update with work. Got the Bosch on thanks to Jenk and Kyle for doing it while I was at work. Also got a strut brace witch ill be getting back Monday and my rear disk covers from the powder coaters

[Alee83]

Is it any lower yet???

[karl1989]

Nope still pushing her ass up

[karl1989]

Got pulled by the po po last night for coal thought here we go getting dipped. Asked if I use veg witch I don't just straight derv. They didn't even dip the tank they thought it was cool there own words haha. North police can't beat some if them

[Alee83]

LOL... Trust you! If it was running Veg it would have smelt like chips, stupid Po Po...

[karl1989]

Well got my strut brace back from CAS coatings

[ATTACH]4838[/ATTACH]

[ATTACH]4836[/ATTACH]

[ATTACH]4837[/ATTACH]

What we think

---

Well got my strut brace back from CAS coatings

   

   

   

What we think

[karl1989]

Got my backing plates back today more nice yellowness

   

[HDIkyle]

Awesome! Such a nice shade of yellow aswell. Want my car doing that colour lol