Car feeling very sluggish

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Car feeling very sluggish
#1
Over the last couple of days the car has been feeling very sluggish under acceleration. Only thing that's been done is new exhaust fitted 2 weeks ago (which made it more responsive if anything) and catch tank fitted yesterday.

Since the new exhaust was fitted, it's been running a lot smoother and still does now. I'm worried the fitter might have broken the wires on my lambda (haven't had a chance to check yet) but it seems to be running to well to have a faulty lambda and it's not using any more fuel than usual.

Help!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#2
Maybe because its a 1.8 :-P
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#3
4WayDiablo Wrote:Maybe because its a 1.8 :-P

You know, when I saw you had replied I knew it was going to be a useless post......FYC!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#4
IAT sensor? made mine feel like a 1.6 when it was unplugged
Reply
Thanks given by:
#5
NiallHarper Wrote:
4WayDiablo Wrote:Maybe because its a 1.8 :-P

You know, when I saw you had replied I knew it was going to be a useless post......FYC!
Flying yellow cats?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#6
Dum-Dum Wrote:IAT sensor? made mine feel like a 1.6 when it was unplugged


Iat?
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#7
Inlet Air Temperature.
Reply
Thanks given by:
#8
Ah! Will check it actually because I might of disturbed it when refitting my air filter as that is quite close.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#9
Which one is it?
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#10
What you mean Matt? What sensor? On the gti throttle body it's the one on the bottom that goes into the tb before the butterfly. Has a grey 2 pin plug on the bottom of the tb.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#11
I still maintain it is because its a 1.8 :-P and its french
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#12
An but at least mine is reliable Phil! Well rarely breaks down! Lol
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#13
1.8 is probably the best all round engine of the 306!! Smile

And are you sure its sluggish....and not that you've just got used to it?
Reply
Thanks given by:
#14
Nah I know you get used to them but I hooned it off up the road earlier, when it was nice and warm, and it just wouldn't rev as freely as it did before.

And yeah Tom 1.8 is the best engine Smile
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#15
NiallHarper Wrote:Nah I know you get used to them but I hooned it off up the road earlier, when it was nice and warm, and it just wouldn't rev as freely as it did before.

And yeah Tom 1.8 is the best engine Smile

Ah fair enough....cos I had to drive the 1.4 again to make the 1.8 feel quick again after the inital 'wow 115 bhpz' lol......
Reply
Thanks given by:
#16
NiallHarper Wrote:An but at least mine is reliable Phil! Well rarely breaks down! Lol
The only time my car has broken down was a week after i bought it and the turbo spewed all over the A3
So nerrr!
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#17
4WayDiablo Wrote:
NiallHarper Wrote:An but at least mine is reliable Phil! Well rarely breaks down! Lol
The only time my car has broken down was a week after i bought it and the turbo spewed all over the A3
So nerrr!

Boost leaks count as a breakdown. Tongue
Reply
Thanks given by:
#18
Is there a warning light on the dash?
[Image: Foxy2.jpg]
Reply
Thanks given by:
#19
Toms306 Wrote:
4WayDiablo Wrote:The only time my car has broken down was a week after i bought it and the turbo spewed all over the A3
So nerrr!

Boost leaks count as a breakdown. Tongue
No it doesnt! Lol its completely driveable with no boost lol. Slow as fook but still fine lol
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#20
Foxy-jim Wrote:Is there a warning light on the dash?

Nope nothing. Yet...
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#21
Blowing a FMIC hose counts though surely Wink
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#22
4WayDiablo Wrote:Maybe because its a 1.8 :-P

That's not a real reason, my 1.8 can stay with a '6 :dance:
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#23
NiallHarper Wrote:
Foxy-jim Wrote:Is there a warning light on the dash?

Nope nothing. Yet...

Don't think it would be a lambda as that should show up...
[Image: Foxy2.jpg]
Reply
Thanks given by:
#24
Foxy-jim Wrote:Don't think it would be a lambda as that should show up...

They don't always. They normally only show up when they stop working all together. If they go out of range, they don't give a EML
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#25
All this 1.8 slagging...

You realise the XU7JP4 is what they use bored out to 2.0l in the WRC cars, ally block, steel liner... It's a MUCH superior block to the GTi6 block IMO. It's only the head that's pants as stock, but they've got masses of meat on them for porting them out...

Or - oh look, how convenient, the Mi16 1.9 head is 83mm bore too...
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#26
Ruan Wrote:All this 1.8 slagging...

You realise the XU7JP4 is what they use bored out to 2.0l in the WRC cars, ally block, steel liner... It's a MUCH superior block to the GTi6 block IMO. It's only the head that's pants as stock, but they've got masses of meat on them for porting them out...

Or - oh look, how convenient, the Mi16 1.9 head is 83mm bore too...

Yeah! What he said!


Gave it a ragging up the road yesterday when it was cold (bad I know but I wanted to see if it made a difference) and it was still the same so I don't think it's a temperature problem.
Any other ideas guys?
Might wait till payday and give it a good service and wack some redex through it.
If it was a blocked fuel filter, it would be quite rough would it not? Just a thought.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#27
Could be new fuel filter time. Also hows the air filter?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#28
NiallHarper Wrote:
Foxy-jim Wrote:Don't think it would be a lambda as that should show up...

They don't always. They normally only show up when they stop working all together. If they go out of range, they don't give a EML

I had a warning light when my cat wasn't working so the lambda picked up the fault and flashed up the light.
[Image: Foxy2.jpg]
Reply
Thanks given by:
#29
That's because you have two lambda. I don't. The only reason it flagged that up for you is because it would of noticed no difference in readings between the two.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#30
Ah right, didn't realise the 1.8 only had one! Haha. Learn something new!

I would try redex mate. Just pour a whole thing in with half a tank and it will give it a good clean!
[Image: Foxy2.jpg]
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Sluggish xu10j4rs sherman306 19 4,748 23-06-2014, 05:17 PM
Last Post: Niall

Forum Jump:


Users browsing this thread: 1 Guest(s)