Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
16-11-2012, 05:39 PM
(This post was last modified: 16-11-2012, 05:58 PM by kyleo92.)
As title reads, my car has recently developed a ticking sound which gets louder when i accelerate, doesnt make any sound when accelerator pedal isnt pushed... located sound to left side of the engine bay.
Does it sound like a common symptom of fuel injectors need replacing?
If so realistically how easy to do, cost, and how long would it take as I use my car for work an need it first thing monday morning?
Or could it be crankshaft pulley or something else?
If it helps car has done 140k and haven't got much of a service history apart from MOTs and a couple of service receipts
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 623
Threads: 39
Joined: Dec 2011
Reputation:
0
Location: Dewsbury
Car Model/Spec: 306 gti6
Thanks: 2
Given 2 thank(s) in 2 post(s)
Does the ticking stop at 3.5k rpm?
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
16-11-2012, 06:05 PM
(This post was last modified: 16-11-2012, 06:17 PM by kyleo92.)
yeah to be exact around 3.2k which i know is injector related..
I hear it in idle quite quietly and then the more i rev upto 3.2k the louder it gets..
Its too dark for me to have a proper look around at the minute though
Actually thinking about it... it could be my camshaft pulley starting to fail, they're only rated for about 70k arent they? and it sounds nearer to drivers side..
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 5,494
Threads: 202
Joined: Dec 2011
Reputation:
58
Location: Eastleigh
Car Model/Spec: S16 and HDi daily
Thanks: 2
Given 29 thank(s) in 28 post(s)
i bet it's injectors if it stops at 3.2k, nowt to worry about!
Welding and fabrication projects undertaken, contact me for more information.
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
(16-11-2012, 07:41 PM)Jonny81191 Wrote: i bet it's injectors if it stops at 3.2k, nowt to worry about!
I think because I have no sound deadening in my engine bay it sounds worse than what it is?
So is it just a case of cleaning them, replacing the copper rings around them?
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
someone has actually replaced it with a gti engine last night
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
(16-11-2012, 10:41 PM)Niall Wrote: someone has actually replaced it with a gti engine last night

Hahaha!
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
(16-11-2012, 09:35 PM)kyleo92 Wrote: I think because I have no sound deadening in my engine bay it sounds worse than what it is?
So is it just a case of cleaning them, replacing the copper rings around them?
There's been loads of threads on this recently, have a look about. The general gist is that there's nothing you can do to stop it short of buying new injectors. Fuel system cleaner will do more harm than good, copper washers won't make much of a difference, Cully claims even refurbished injectors start ticking again within a year.
Posts: 663
Threads: 22
Joined: Jan 2012
Reputation:
6
Location: Herefordshire
Car Model/Spec: 306 HDi Stage 1
Thanks: 0
Given 0 thank(s) in 0 post(s)
Poodle's right on the money I'm afraid, new ones or very low mileage replacements.........Tom306HDi on .net had a set refurbed by the same people who did Cully's and they're ticking again after only 3 months!
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
17-11-2012, 11:51 AM
(This post was last modified: 17-11-2012, 11:55 AM by kyleo92.)
Thanks guys looking at buying some more, even though i believe its only just the one tapping im going to replace all of them just in case....
Realistic price so i dont get mugged off?
(17-11-2012, 05:24 AM)Poodle Wrote: (16-11-2012, 09:35 PM)kyleo92 Wrote: I think because I have no sound deadening in my engine bay it sounds worse than what it is?
So is it just a case of cleaning them, replacing the copper rings around them?
There's been loads of threads on this recently, have a look about. The general gist is that there's nothing you can do to stop it short of buying new injectors. Fuel system cleaner will do more harm than good, copper washers won't make much of a difference, Cully claims even refurbished injectors start ticking again within a year.
Yeah had been looking around before i posted this thread up, take it, it will be safe to run for the next week or so?
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
17-11-2012, 02:25 PM
(This post was last modified: 17-11-2012, 02:26 PM by Poodle.)
Ticking injectors aren't a problem mate, just an annoyance, it'll probably be fine for the next 50k miles lol.
(17-11-2012, 06:32 AM)gareth7 Wrote: Poodle's right on the money I'm afraid, new ones or very low mileage replacements.........Tom306HDi on .net had a set refurbed by the same people who did Cully's and they're ticking again after only 3 months!
Who did these? I've got some dieselbob ones, want to see how long they last...
Posts: 663
Threads: 22
Joined: Jan 2012
Reputation:
6
Location: Herefordshire
Car Model/Spec: 306 HDi Stage 1
Thanks: 0
Given 0 thank(s) in 0 post(s)
DieselBob mate........they barely lasted three months.
I had a set I was going to send up to them but after hearing Tom's I'm not bothering.
Posts: 10,864
Threads: 117
Joined: Dec 2011
Reputation:
119
Location: Southampton
Car Model/Spec: 306 HDi and friends
Thanks: 13
Given 106 thank(s) in 106 post(s)
Ah bugger hahaha, never mind. Got a bosch specialist near me i'm doing my best to get friendly with, but they want close enough to a ton per injector... :S
Posts: 261
Threads: 11
Joined: Mar 2012
Reputation:
0
Location: portsmouth
Car Model/Spec: 306 hdi meridian
Thanks: 0
Given 0 thank(s) in 0 post(s)
Just turn the music up lol
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
(17-11-2012, 05:20 PM)puggyhdi Wrote: Just turn the music up lol
Haha I normally do.. However I'm driving my managing director next week which is gonna be funny sounds like a tractor!
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 261
Threads: 11
Joined: Mar 2012
Reputation:
0
Location: portsmouth
Car Model/Spec: 306 hdi meridian
Thanks: 0
Given 0 thank(s) in 0 post(s)
Haha that's how mine sounds, best way to tell which one is ticking is put a screwdriver against each injector and listen through the screwdriver, I seem to get more off a weird tick from injector 2. But if changing them replace as a set of 4 with the same codes on them. Probs a bit of useless advise lol.
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
(17-11-2012, 06:18 PM)puggyhdi Wrote: Haha that's how mine sounds, best way to tell which one is ticking is put a screwdriver against each injector and listen through the screwdriver, I seem to get more off a weird tick from injector 2. But if changing them replace as a set of 4 with the same codes on them. Probs a bit of useless advise lol.
Not at all mate, tried the screwdriver trick however couldnt really tell which one, however I'm sure it's the first one, yeah gonna replace them all when the time comes.. Do I need to replace the whole rail or just new injectors?
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 261
Threads: 11
Joined: Mar 2012
Reputation:
0
Location: portsmouth
Car Model/Spec: 306 hdi meridian
Thanks: 0
Given 0 thank(s) in 0 post(s)
Oh cool yea just injectors mate a pain to get out tho.
Posts: 405
Threads: 34
Joined: Jul 2012
Reputation:
2
Location: Leicester
Car Model/Spec: 306 Hdi
Thanks: 0
Given 0 thank(s) in 0 post(s)
Got it sorted today guys, took it to my garage to look at and it was my crankshaft pulley, rubber had corroded on it...
£140 fitted and 3 month warranty so I'm chuffed it's all sorted
Thanks for your help guys :-)
“Someone get the foghorn, Kyles out in the Diseaseal again”
Posts: 13,881
Threads: 476
Joined: Dec 2011
Reputation:
81
Location: Ipswich
Car Model/Spec: 306 Rallye
Thanks: 4
Given 104 thank(s) in 102 post(s)
ive got this problem too. I can only hear it some times. Its not as bad as Toms306 has been making out! Yeh i just turn the music up  glad youve sorted it!
|