I have a hoffman straight through centre section, this was fitted to my 2001 HDI for less than 6 months so it in good condition, iirc cost me 47 quid so looking for 20 quid.
Have not got tome to post as i work away from home all week, so would be collection only from TQ4, i travel between Torbay and Helston in Cornwall every week, so could meet on the way and drop off it that is easier for someone.
![[Image: e1f32d44-0013-441b-b278-a3a8285d6580_zpsfb66fbee.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/e1f32d44-0013-441b-b278-a3a8285d6580_zpsfb66fbee.jpg)
Also i have a scorpion back box, i think it was originally from a gti 6 but it has been on my HDI for about a year, it will come with a pretty new clamp, and the little bung that goes between the 2 flanges when fitting. It has a few small dents and scratches on as to be expected.
It does need a small repair as shown in the picture, it has a very small hole where the inlet flange joins the silencer, where it looks like some of the weld has come away, so anyone that can weld this would be a nice cheap fix!!!!!
Say 10 quid!!
Again this would be collection only from TQ4 or as mentioned above i travel between Torbay and Helston in Cornwall every week, so could meet on the way and drop off.
![[Image: fa7ca40e-6526-4d57-af44-b8f78ed9e864_zps99399830.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/fa7ca40e-6526-4d57-af44-b8f78ed9e864_zps99399830.jpg)
![[Image: 835601a4-081b-454b-a35c-92d9d48bd8bb_zps954dd889.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/835601a4-081b-454b-a35c-92d9d48bd8bb_zps954dd889.jpg)
Have not got tome to post as i work away from home all week, so would be collection only from TQ4, i travel between Torbay and Helston in Cornwall every week, so could meet on the way and drop off it that is easier for someone.
![[Image: e1f32d44-0013-441b-b278-a3a8285d6580_zpsfb66fbee.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/e1f32d44-0013-441b-b278-a3a8285d6580_zpsfb66fbee.jpg)
Also i have a scorpion back box, i think it was originally from a gti 6 but it has been on my HDI for about a year, it will come with a pretty new clamp, and the little bung that goes between the 2 flanges when fitting. It has a few small dents and scratches on as to be expected.
It does need a small repair as shown in the picture, it has a very small hole where the inlet flange joins the silencer, where it looks like some of the weld has come away, so anyone that can weld this would be a nice cheap fix!!!!!
Say 10 quid!!
Again this would be collection only from TQ4 or as mentioned above i travel between Torbay and Helston in Cornwall every week, so could meet on the way and drop off.
![[Image: fa7ca40e-6526-4d57-af44-b8f78ed9e864_zps99399830.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/fa7ca40e-6526-4d57-af44-b8f78ed9e864_zps99399830.jpg)
![[Image: 835601a4-081b-454b-a35c-92d9d48bd8bb_zps954dd889.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/835601a4-081b-454b-a35c-92d9d48bd8bb_zps954dd889.jpg)
![[Image: fa697d8a-1680-4bc2-8b25-c304ccc799bb_zps35810ea4.jpg]](http://i242.photobucket.com/albums/ff82/pipeboy/fa697d8a-1680-4bc2-8b25-c304ccc799bb_zps35810ea4.jpg)