locking wheel nuts - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: locking wheel nuts (/showthread.php?tid=974) |
locking wheel nuts - gazdtub - 18-01-2012 Does anyone have any tips on removing locking wheel nuts without the key I have the good old socket and hammer but not enough room between rim and nut any suggestions woul be great Re: locking wheel nuts - declantg - 18-01-2012 Do you no the make of them? Might be worth trying to find the replacement socket otherwise it will be a pig of a job Re: locking wheel nuts - 4WayDiablo - 18-01-2012 if its the ones with splines on the side, try smash a 19mm socket (or whatever is just to small) onto it Re: locking wheel nuts - Dum-Dum - 18-01-2012 You could try a gator grip socket (wish i had the money for a set of these) http://www.ebay.co.uk/itm/Gator-Grip-ET ... _500wt_949 Or a locking wheel nut removal tool/socket http://www.ebay.co.uk/itm/SCARFELL-7-PI ... _523wt_698 locking wheel nuts - Jonny b - 18-01-2012 Them gator grip things are fecking useless, my bud who runs a tyre place, got a set first time he used it all the splines bent and fell out got a replacement that lasted 3 uses so just got his money back. Best bet is get something welded to it Re: locking wheel nuts - Curt - 18-01-2012 Chisel and a large hammer Re: locking wheel nuts - gazdtub - 18-01-2012 Thans for the advice recently bought a stick welder never gived it a thought just hope the weld will hold it enough to crack the nuts off My local garage will do them for 25quid a wheel f*ck that :o Re: locking wheel nuts - Hitchos - 18-01-2012 17mm socket and a huge hammer Re: locking wheel nuts - Hitchos - 18-01-2012 25 quid robbing gets got mine drilled out for a tenner Re: locking wheel nuts - D@wson - 19-01-2012 Locking wheel nut remover kit from snapon Re: locking wheel nuts - Connor - 19-01-2012 Im with jonny, those sockets are complete wank on anything done up more than finger tight, try welding something on the end, will be your best bet |