Head bolts - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Head bolts (/showthread.php?tid=9553) |
Head bolts - brad306 - 07-01-2013 hi all, recently took my head off my d turb to be sent off for skimming, wandering what the correct size of the head bolts are to see if they are stretched, can someone tell me the measurements so i can check? or is it just worth putting a new set in? thanks. RE: Head bolts - CJ_Derv - 07-01-2013 Unless your going to be running silly boost id just go for some from local motor factors bud they should give you sizes etc RE: Head bolts - ally406 - 07-01-2013 Personally I would just fit a new set as a matter of course, I don't think they are expensive? RE: Head bolts - ozonehostile - 07-01-2013 this reminds me, ive got a set of forged head bolts i need to fit RE: Head bolts - Ben - 08-01-2013 It gives you measurements in the haynes manual and gives you the tolerance at which you should change them. |