+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: FAO coilover users (/showthread.php?tid=9135)
FAO coilover users - HDIkyle - 21-12-2012
Fitted my coilovers but the leg only goes about half way down maybe a touch more into the hub doe to the locating stub been welded to the outside. There originally off a 206 so not sure if this is the reason or it will be ok.
RE: FAO coilover users - puglove - 21-12-2012
Grind the fucker off and drop it further down and just wack a nob of weld on higher up so it cant drop any more simples
RE: FAO coilover users - HDIkyle - 21-12-2012
There on now so can't get a welder in but there stainless arnt they so can't weld it to steel?
They hold rock solid still with the but tightened
RE: FAO coilover users - Rippthrough - 21-12-2012
You can weld steel to it but the weld will be brittle and obviously it'll rust.
The problem is, welding to a casing full of oil...
RE: FAO coilover users - Piggy - 21-12-2012
ive heard this is the case with these but I know of couple guys who have run them 20/30k miles no issues