• Fix Front Electric Windows
  Fix Central Locking
  Good Clean
  Fit Lazers
  T-Cut some of the scratches out.
  Fit GTI 6 Beam
  Fit GTI 6 Fronts[/list:u]
  
  Completed So Far:
  
  • Fitted ICE
    Head Gasket
    Oil + Filter
    Fuel Filter
    Changed Alternator
    Running a KKK
    Cambelt Kit
    Water Pump
    Fit Bosch Pump
    Paint Calipers & Beam
    [/list:u]
    UPDATE:
    
    Engine is coming out on the 18th november. Head is coming off and going for a skim then a new head gasket set is going on. While its out a new water pump cambet kit, aux belt and alt are going on and is having a full service. Also bosch is going on while its out and having a good clean. Hopefully it will be back in by the sunday all running sweet. Will take some pics while were in the process.
    
    UPDATE: 19/11/2011
    
    Head came back today nice shiny and new. We managed to snap the bolt on the drivers side sub frame but we have made a new mounting bolt to hold it in place. Found out its running a KKK which is a shame but i dont really have any luck with the Phase 1's in the turbo department. Everythings all cleaned off and we have started to rebuild the engine. Just the inlet and turbo to go back on then we will lock it out and retime it and then the bosch injectors are going in and then it should be ready to put back in tomorrow afternoon.
    
    
    
    
    
    
    
    
    
    
    
    
    UPDATE 08/01/2012:
    
    Well its been eventful with this car, engine mount decided to destroy the mount point in the chassis but i here this is pretty common. So that has been welded up but has started knocking its cock off again (Back to the drawing board). May even buy one of those kits off the GTI 6 forums. Other than the engine mount everything seems fine, still bits and bobs to do which are mainly electronic such as the central locking and windows. Going to buy a pully, woodruff and a bolt from pug for the bosch pump and refit it why not at £37. Going to replace each side of the suspension and steering within the next week, both track rods drop links and wishbones. Hopefully i can grab some lazers aswell just waiting for a reply. Going to be getting a full GTI 6 brake set up including the rear beam and I am also thinking about getting an exhaust to stick on to free up some air flow! I imagine its probably time for it to be changed as it looks like its been on since 1996!
    
    Well thats all for now with my update if anyone can help or offer some advice please get in touch.
    
    UPDATE 21/01/2012:
    
    Well collected some more parts such as a full GTI6 brake set up, new front struts, track rod ends, drop links, a boost guage and discs and pads for the beam.
    Will be cracking on fitting some of this stuff tmorrow as now im going to FCS for the frist time i want it to be ready!

studturbo Wrote:Good thread pal be keeping a eye on this

Foxy-jim Wrote:What's your future plans. Looks like a nice project!

Foxy-jim Wrote:How about some stiffer springs and better shocks so it handles better?

• Good Clean
  T-Cut some of the scratches out.
  Fit GTI 6 Beam
  

• Fitted ICE
  Head Gasket
  Oil + Filter
  Fuel Filter
  Changed Alternator
  Running a KKK
  Cambelt Kit
  Water Pump
  Fit Bosch Pump
  Paint Calipers & Beam
  Fix Front Electric Windows
  Fix Central Locking
  Fit Lazers
  Fit GTI 6 Fronts