How NOT to clock a td04 :'( - Printable Version

How NOT to clock a td04 :'( - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: How NOT to clock a td04 :'( (/showthread.php?tid=8102)

Pages: 1 2

How NOT to clock a td04 :'( - Tom - 18-11-2012

[Image: 20121118_193453.jpg]

Cartridge is completely f*cked all the way round the coldside. Cannot describe how raged i am.

RE: How NOT to clock a td04 :'( - Ricky - 18-11-2012

The TD04 is not fun to clock at all!

Re: How NOT to clock a td04 :'( - Dan! - 18-11-2012

'the f*ck did you manage that? You got hands like hagrid or something lol

RE: How NOT to clock a td04 :'( - Tom - 18-11-2012

With a mallet....

In all seriousness i was speaking to Darren this afternoon about this stuff and he said clamp it up in the vice and just tap it round and it'll go. Oh its gone lol

RE: How NOT to clock a td04 :'( - darrenjlobb - 18-11-2012

WTF tom? I said tap it with a rubber hammer, how hard did you hit it??!!

Re: How NOT to clock a td04 :'( - Tyronnster - 18-11-2012

Whats clocking it?

RE: How NOT to clock a td04 :'( - Tom - 18-11-2012

In all seriousness i could hit it alot harder if thats what i was going for :/

(18-11-2012, 08:33 PM)Tyronnster Wrote: Whats clocking it?

Rotating the hot and coldside so they line up with the manifold and where ever you want the pressureised bit pointed lol

Re: RE: How NOT to clock a td04 :'( - Dan! - 18-11-2012

(18-11-2012, 08:33 PM)Tyronnster Wrote: Whats clocking it?

Rotating the compressor housing in relation to the center cartridge, so that the oil in/out bits of the cartridge face up/down respectively and the compressor outlet faces upwards like it does on a standard xud turbo.

Re: RE: How NOT to clock a td04 :'( - Tyronnster - 18-11-2012

(18-11-2012, 08:35 PM)Tom Wrote: In all seriousness i could hit it alot harder if thats what i was going for :/

(18-11-2012, 08:33 PM)Tyronnster Wrote: Whats clocking it?

Rotating the hot and coldside so they line up with the manifold and where ever you want the pressureised bit pointed lol

Cheers

RE: How NOT to clock a td04 :'( - zx_volcane - 18-11-2012

Holy moly!

How NOT to clock a td04 :'( - RePT - 18-11-2012

I wish i could see where youve gone wrong :p

..has no clue about td04 /selfslap

RE: How NOT to clock a td04 :'( - Dave - 18-11-2012

Will still work tho, as long as its caught somewhere will still hold the comp on..

RE: How NOT to clock a td04 :'( - Tom - 18-11-2012

Its fractured right the way round and theres a bit of seal stuck in there aswell :/ I think its pretty f*cked

RE: How NOT to clock a td04 :'( - HDIkyle - 18-11-2012

My TD04 had a locator lug on both sides of the cartraige so i have to take the housing off and redrill holes for it. the housing one anyway but i ground it off the hotside.

RE: How NOT to clock a td04 :'( - Dave - 19-11-2012

lol dont scrap it, even if you just epoxy the hell out of it, I would still put it on a car to save buying another one! Its on a flush flange its not like its loose is it, other than rotating round am I right?

RE: How NOT to clock a td04 :'( - Tom - 19-11-2012

Surely that bit of oil seal pinched in there means it would leak oil everywhere and be f*cked? I think im going to have to buy a replacement lol its still not loose i cant turn it by hand

RE: How NOT to clock a td04 :'( - CJ_Derv - 19-11-2012

Please tell me you havent tried tapping it with the circlip in place? Bit of a tip with these split the hotside first then you can get more access and can tap it much more easily, iv done 3 td04's and never seen this

RE: How NOT to clock a td04 :'( - Tom - 20-11-2012

More pictures of the comic damage to come, got it all apart now Smile

RE: How NOT to clock a td04 :'( - darrenjlobb - 20-11-2012

To be fair, could probs fix that with the welder, would oinly need some spots around the edge and it would be perfectly useable again given you havent bent the blades to badly

Dump the turbo on my bench next time your passing mate, and ill see what I can do,

RE: How NOT to clock a td04 :'( - CJ_Derv - 20-11-2012

Gutted for ya bud, at least they cheap enough get it round to darren and get it in and look for another in mean time

RE: How NOT to clock a td04 :'( - Tom - 20-11-2012

Right here goes. Need a new oil seal but i reckon we could be crafty with a welder and fix it.
[Image: 20121120_164615.jpg]

Gave it a wipe over with a rag but it looks really good to me! Except the broke bit lol
[Image: 20121120_165026.jpg]

RE: How NOT to clock a td04 :'( - Daniel306 - 20-11-2012

looks ok, just run a tig welder round it

RE: How NOT to clock a td04 :'( - Tom - 20-11-2012

(20-11-2012, 08:01 PM)Daniel306 Wrote: looks ok, just run a tig welder round it

I think thats the plan! We shall see tomorrow ;D

RE: How NOT to clock a td04 :'( - CJ_Derv - 20-11-2012

Youve tried tappin it round with the housing attatched, when we say give it a tap to free it we mean with the circlip released as it has a locating pin and wont budge hence why its dont what its done pal hope you can salvage something from it

RE: How NOT to clock a td04 :'( - darrenjlobb - 20-11-2012

Im going to get the welder out on it tomorrow!

RE: How NOT to clock a td04 :'( - Tom - 20-11-2012

(20-11-2012, 08:22 PM)CJ_Derv Wrote: Youve tried tappin it round with the housing attatched, when we say give it a tap to free it we mean with the circlip released as it has a locating pin and wont budge hence why its dont what its done pal hope you can salvage something from it

Darren said it would go without removing the clip, he must of forgot about the lug and i obviously dont know any better lol look what i done to it! This is all part of the learning curve! Wouldnt be fun if it was easy Smile

RE: How NOT to clock a td04 :'( - darrenjlobb - 20-11-2012

I basically said to tom that I always spin mine by just tapping it lightly with a rubber mallet, and they normally go fairly easily with clip in, not thinking that this was a totall stocxk turbo / had never been apart before ! That said, the word tapping was used, not lamping lol!!Heavy hand me thinks Tongue

but ill see what i can do!

RE: How NOT to clock a td04 :'( - CJ_Derv - 20-11-2012

At least it should be able to be fixed, i know a thing or too about being heavy handed Tongue

RE: How NOT to clock a td04 :'( - Tom - 20-11-2012

Everyone calls me heavy handed Sad

RE: How NOT to clock a td04 :'( - darrenjlobb - 21-11-2012

Had a quick go at repairing this for Tom this afternoon,

Sadly ive also noticed one of the turbine blades has a small chip in it, so its not ideal, to be fair it would most likely be fine, as things normally are, but never going to be perfect again, but made the best of whats left anyway.

[Image: IMAG0858.jpg]