+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: Phase 1 headlights onto Phase 2 (/showthread.php?tid=5250)
Phase 1 headlights onto Phase 2 - HDIkyle - 31-07-2012
I have a set of single optic phase 1 lights to go on but the phase 2 has different plugs. If I get a set of twin optic lights do there plug into the standard plugs or do I need the connector and some abit of the wiring to be able to join them in?
RE: Phase 1 headlights onto Phase 2 - Connor - 31-07-2012
You'll probably need to swap the plug, afaik the ph2/3 has a multiplug and the ph1 plugs are individual. Also what are you doing about the slam panel? You gonna bodge the lights on or you swapping it?
RE: Phase 1 headlights onto Phase 2 - HDIkyle - 31-07-2012
Swapping it putting a full Phase 1 front on bonnet bumper ect. Ye its all one plug on the phase 2 so if I break them open and take the wiring out I can plug the original multiplug in then wire the phase 1 bulb holder to the loom so I can just unplug it if I ever fit phase 2/3 lights again?