+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: ffs boost leak (/showthread.php?tid=4610)
ffs boost leak - zekegti6 - 03-07-2012
I'm currently chasing a epic boost leak that's winding me up.
So far I've change D seal turbo to top mount pipe the top mount cooler all new jubilee clips but still have a boost leak I've now jubileed the t piece on the boost compensator and no better it seems to start at about 10psi and starts screeching at 14. Anyone know where this leak could be I had this at fcs.
Started after a head change. Could it be inlet bolts loose? Turbo is untouched at present so surely not leaking from the unit its self?
Here's a stupid question to would it leak from the rocker as I've noticed there is a washer missing from one of the three bolts but didn't think there would be much pressure in there
Hope someone can help
RE: ffs boost leak - 4WayDiablo - 03-07-2012
Wouldn't leak from the rocker
And from what you say the inlet is the last thing it can be so yeah one must be loose
Shine a light down the back around the ports and you can usually tell if you have a leak
RE: ffs boost leak - mark_airey - 03-07-2012
Manifold bolts..............there is nothing else left if your sure that everything else is tight
RE: ffs boost leak - darrenjlobb - 03-07-2012
As said your manifold must be blowing, did you use a new gasket? Did you put ALL the bolts back in?
RE: ffs boost leak - zx_volcane - 03-07-2012
is the lda top screwed down tight?
RE: ffs boost leak - zekegti6 - 03-07-2012
Everything else checked yeah Ida screw? Not so sure
Darren it was a new gasket but was a gasket paper kit for xud9 t.
Would you suggest taking it off and doing it again?
Cheers guys for the advice
RE: ffs boost leak - zx_volcane - 03-07-2012
(03-07-2012, 02:55 PM)zekegti6 Wrote: Everything else checked yeah Ida screw? Not so sure
Darren it was a new gasket but was a gasket paper kit for xud9 t.
Would you suggest taking it off and doing it again?
Cheers guys for the advice
not the screw - but the four bolts/screws holding the top down, are they tight?
RE: ffs boost leak - Ricky - 03-07-2012
Exhaust manifold blowing from gasket?
RE: ffs boost leak - Jtrigga - 04-07-2012
Im going with inlet manifold try doing the bolts up first sometimes they are easy to forget.
RE: ffs boost leak - zekegti6 - 07-07-2012
Ok mate ill have a try mate cheers
RE: ffs boost leak - CJ_Derv - 18-07-2012
Hi mate did you find the problem as im having similar but not as great psi leak
ta
RE: ffs boost leak - zekegti6 - 09-12-2012
yeah the guy who repaired it first time left 1 exhaust gasket off and 1 ilet one