+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: Meets (https://www.306oc.co.uk/forum/forumdisplay.php?fid=8)
+--- Thread: Compbrake Motorsport at FCS 2012 (/showthread.php?tid=4111)
Compbrake Motorsport at FCS 2012 - compbrakemotorsport - 12-06-2012
Come and see us for some AMAZING cash deals on our products at the FCS !!! Were on the Constella stand !!! Bring your cash and grab a BARGAIN!!
Compbrake Motorsport at FCS 2012 - Matt - 12-06-2012
Do gear linkages by anychance?
Re: Compbrake Motorsport at FCS 2012 - compbrakemotorsport - 12-06-2012
We don't but Constella who are one of the sponsors and are kindly letting us exhibit with them do them, See you there!
Re: Compbrake Motorsport at FCS 2012 - Scott - 12-06-2012
Good stuff
Any chance you could post up a price list beforehand? Need to know how much to bring 
Re: Compbrake Motorsport at FCS 2012 - Niall - 12-06-2012
Scott Wrote:Good stuff
A lot!
Re: Compbrake Motorsport at FCS 2012 - puglove - 12-06-2012
As you do brakes, Do you do a 4 pot set up that will allow you to retain 15" cyclones on a 306?
Also would like to no what super dooper 306oc Fcs price you could do on top mounts so that i could count my pennies up and see if i could aford them at FCS , because sods law i get paid on the 18th the next bloody day
Re: Compbrake Motorsport at FCS 2012 - 4WayDiablo - 12-06-2012
puglove Wrote:As you do brakes, Do you do a 4 pot set up that will allow you to retain 15" cyclones on a 306?Wilwoods fit don't they?
Re: Compbrake Motorsport at FCS 2012 - puglove - 12-06-2012
4WayDiablo Wrote:puglove Wrote:As you do brakes, Do you do a 4 pot set up that will allow you to retain 15" cyclones on a 306?Wilwoods fit don't they?
Yup but they are a pain to get hold with the right mountings, spacers ect, i am inquiring about a set with some one atm, its getting annoying now because i cant get the S/C fitted without sorting some brakes 1st, nut dont want to loose my cyclones, spesh as they are refurbed with 4 spanking T1rs :evil:
Re: Compbrake Motorsport at FCS 2012 - Grant - 12-06-2012
puglove Wrote:Yup but they are a pain to get hold with the right mountings, spacers ect, i am inquiring about a set with some one atm, its getting annoying now because i cant get the S/C fitted without sorting some brakes 1st, nut dont want to loose my cyclones, spesh as they are refurbed with 4 spanking T1rs :evil:
Then use '6 brakes with a decent pad/disc setup.
They have more than enough stopping power...
And since when did you have a SC?
hock: Need to keep my ear to the ground more lol
Re: Compbrake Motorsport at FCS 2012 - puglove - 12-06-2012
Grant Wrote:puglove Wrote:Yup but they are a pain to get hold with the right mountings, spacers ect, i am inquiring about a set with some one atm, its getting annoying now because i cant get the S/C fitted without sorting some brakes 1st, nut dont want to loose my cyclones, spesh as they are refurbed with 4 spanking T1rs :evil:
Then use '6 brakes with a decent pad/disc setup.
They have more than enough stopping power...
And since when did you have a SC?
Need to keep my ear to the ground more lol
Had it about 2 months now maybe a little longer? Need an intercooler set up and a low boost ring aswell before i can run it,
I have a set of Ferodo pads to go in and already have drilled and grooved, but i would like a set of 4 pots before fitting
Re: Compbrake Motorsport at FCS 2012 - Grant - 13-06-2012
Fair play.
Eager to see the progress with the S/C setup. I'll have to keep an eye out!
Re: Compbrake Motorsport at FCS 2012 - Connor - 13-06-2012
Giving any freebies out on the day?
Re: Compbrake Motorsport at FCS 2012 - puglove - 13-06-2012
Grant Wrote:Fair play.
Eager to see the progress with the S/C setup. I'll have to keep an eye out!
i should update my project thread really. and add some picys as i havent really mentioned it in there