306 S16 engine with GTi6 inlet - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17) +--- Thread: 306 S16 engine with GTi6 inlet (/showthread.php?tid=37549) |
306 S16 engine with GTi6 inlet - Pingaz - 25-04-2020 Hello guys, I hope y'all are doing fine. I'm about to swap my S16 inlet to the gti6 one. I really don't know what to do with the oil filler thing... Anyone did the same and has some pictures of it, please? I guess the vacuum hoses I've it sorted. The brake booster vacuum hose connects directly to the vacuum pump? RE: 306 S16 engine with GTi6 inlet - Pingaz - 06-05-2020 I've sorted this out, just left it hanging for the time being RE: 306 S16 engine with GTi6 inlet - Eeyore - 06-05-2020 Had to google some pictures. Looks like youll have to do something custom. Ive not seen someone swap the manifolds before. RE: 306 S16 engine with GTi6 inlet - welshpug - 09-05-2020 I fitted a gti6 inlet on an S16 12 years ago when I fitted one into a 205 for a lad in Bristol, he had bought the engine without an inlet and had been told it would fit, bit of a faff but all in it worked fine and went like stink. never found out if it was any different. RE: 306 S16 engine with GTi6 inlet - Pingaz - 11-05-2020 (09-05-2020, 04:17 PM)welshpug Wrote: I fitted a gti6 inlet on an S16 12 years ago when I fitted one into a 205 for a lad in Bristol, he had bought the engine without an inlet and had been told it would fit, bit of a faff but all in it worked fine and went like stink. Yeah, I just struggled with the PAS pipe next to the pump. Mine idles better than before to be honest. Don't know when driving, I have no brakes yet xD Fitted the T4 master RE: 306 S16 engine with GTi6 inlet - welshpug - 13-05-2020 idle wouldn't have been any different as its the same idle valve and same ecu, but there's a fair few vacuum pipes on the rfy inlet that could cause issues, map sensor is on a tube too as its inside the ecu. RE: 306 S16 engine with GTi6 inlet - Pingaz - 14-05-2020 (13-05-2020, 08:42 PM)welshpug Wrote: idle wouldn't have been any different as its the same idle valve and same ecu, but there's a fair few vacuum pipes on the rfy inlet that could cause issues, map sensor is on a tube too as its inside the ecu. Probably had some bad vacuum pipes before |