(07-11-2016, 07:32 AM)Frosty Wrote: Battery live and earth cables

Gti6 sump

Bottom rad hose

(07-11-2016, 09:30 AM)cully Wrote:

(07-11-2016, 07:32 AM)Frosty Wrote: Battery live and earth cables

Gti6 sump

Bottom rad hose

i have these
rad hose there are two types
plastic push fit with plastic wing clips or metal with metal wire retaining clip?

(07-11-2016, 01:08 PM)Eeyore Wrote: i would attempt to make up your own battery cables as i doubt any original ones will be decent. Maybe peugeot still do them?

Ive got a 6 sump but its got the ac mounts missing.

good luck finding astor parts! or any for that matter.

(07-11-2016, 05:57 PM)rocker8742 Wrote: Got the hdi steering wheel here mate, maybe battery cables too, can't remember what I took off


Sent from my iPhone using Tapatalk

(08-11-2016, 01:10 PM)Matt-Rallye Wrote: Frosty if you would take non astor panels i could supply them for £30 collected Might also be able to do a deal on other parts.

(16-11-2016, 06:49 PM)RetroPug Wrote: I have a genuine gti6 catalyst, the outlet pipe has snapped. On my old gti6 the cat snapped in exactly the same place. As mine is one of the older gti6s being a ph.1, I'd imagine they'll all start doing that eventually, especially as people drive on track etc.

My solution was to weld a flexi on the end and then that had a sleeve fitment for my cat back exhaust.

Would it be of interest to you? If not I'll probably weigh it in.

(17-11-2016, 01:02 PM)daniel909 Wrote: I think I have a standard cd player u can have next time im up or your down this way

(16-11-2016, 06:56 PM)Frosty Wrote:

(16-11-2016, 06:49 PM)RetroPug Wrote: I have a genuine gti6 catalyst, the outlet pipe has snapped. On my old gti6 the cat snapped in exactly the same place. As mine is one of the older gti6s being a ph.1, I'd imagine they'll all start doing that eventually, especially as people drive on track etc.

My solution was to weld a flexi on the end and then that had a sleeve fitment for my cat back exhaust.

Would it be of interest to you? If not I'll probably weigh it in.

Poss could be. You able to get some pics?

(19-11-2016, 01:58 PM)RetroPug Wrote:

(16-11-2016, 06:56 PM)Frosty Wrote:

(16-11-2016, 06:49 PM)RetroPug Wrote: I have a genuine gti6 catalyst, the outlet pipe has snapped. On my old gti6 the cat snapped in exactly the same place. As mine is one of the older gti6s being a ph.1, I'd imagine they'll all start doing that eventually, especially as people drive on track etc.

My solution was to weld a flexi on the end and then that had a sleeve fitment for my cat back exhaust.

Would it be of interest to you? If not I'll probably weigh it in.

Poss could be. You able to get some pics?

Can do at some point. It looks like a gti6 with a snapped outlet pipe. It's snapped on the pipe near the fitting to the centre section though, not on the cat.

(19-11-2016, 10:31 PM)RetroPug Wrote: It cracked once, got welded up, and then cracked again. I can't remember what the crack looks like but I could weld it up again. It will probably be a matter of time before it goes again though.

It depends what exhaust you are running but I put a flexi in the replacement and then had that sleeve fitment to the aftermarket cat back. Mine is one of the oldest gti6s, so I imagine this failure mode will start cropping up on others before long.

(24-11-2016, 04:02 PM)ozonehostile Wrote: I've got a magnex decat pipe if you can't find a genuine

(07-11-2016, 07:32 AM)Frosty Wrote: Theres a few bits im after for the gti6, i will prob be adding to the list when i find out more bits i need. If you do have any parts i'm after or come across any on facebook etc let me know. If a bit of a distance away ideally parts will need to be delivered but happy to usually pick up parts if localish.

Battery live and earth cables - sorted
Throttle cable
Gti6 sump - sorted
Gti6 cat (ideally after a genuine 1 but i know not many of them about) - got an aftermarket 1 but ideally still on the lookout for a genuine a
Phase 3 spoiler
Standard CD stereo
Standard steering wheel - sorted
Rear arch liners
Bottom rad hose (push in with metal clip style)
Gti6 gear knob - hopefully sorted
Gti6 standard airbox and pipe work - sorted
Gti6 decat (proper 1 if poss instead if a homemade jobbie)

Body panels in astor grey and pretty good condition
Bonnet
Driver side wing
Side skirts
Front bumper

(28-02-2017, 10:09 AM)reese Wrote:

(07-11-2016, 07:32 AM)Frosty Wrote: Theres a few bits im after for the gti6, i will prob be adding to the list when i find out more bits i need. If you do have any parts i'm after or come across any on facebook etc let me know. If a bit of a distance away ideally parts will need to be delivered but happy to usually pick up parts if localish.

Battery live and earth cables - sorted
Throttle cable
Gti6 sump - sorted
Gti6 cat (ideally after a genuine 1 but i know not many of them about) - got an aftermarket 1 but ideally still on the lookout for a genuine a
Phase 3 spoiler
Standard CD stereo
Standard steering wheel - sorted
Rear arch liners
Bottom rad hose (push in with metal clip style)
Gti6 gear knob - hopefully sorted
Gti6 standard airbox and pipe work - sorted
Gti6 decat (proper 1 if poss instead if a homemade jobbie)

Body panels in astor grey and pretty good condition
Bonnet
Driver side wing
Side skirts
Front bumper

Hi pal,

Are you still after a driver side wing? See my thread below.

http://www.306oc.co.uk/forum/showthread.php?tid=35608

(28-02-2017, 12:36 PM)fatlapit Wrote: throttle cable from ecp

(02-03-2017, 10:20 PM)kentiiboii Wrote: I have original stereo with CD player in good working condition. £20 posted?


Sent from my iPhone using Tapatalk