+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Sumps XUD7 / XUD9 (/showthread.php?tid=34511)
Sumps XUD7 / XUD9 - ginge191 - 12-07-2016
Are the sumps the same on all XUD models.
I've currently got an XUD7 (Peugeot 205 - 1.8 DT) and receiving an XUD9 (Peugeot 406 - 1.9 DT) with a damaged sump.
Are these sumps the same?
RE: Sumps XUD8 / XUD9 - Danny Wideboy - 12-07-2016
I 'm quite sure they are the same dude.
RE: Sumps XUD8 / XUD9 - ginge191 - 12-07-2016
Hmm ok, I'll give it a crack before ordering a replacement!
RE: Sumps XUD8 / XUD9 - bashbarnard - 12-07-2016
same as long as you dont need the aircon bit on the sump that some xud9s have
RE: Sumps XUD8 / XUD9 - darrenjlobb - 12-07-2016
Assume you mean XUD 7
And yes, bolt pattern is the same, can be issues with oil pump pickup, but oil pump can be swapped.
RE: Sumps XUD8 / XUD9 - ginge191 - 12-07-2016
(12-07-2016, 07:13 PM)darrenjlobb Wrote: Assume you mean XUD 7
Ah yes, XUD7!
Spot on, thanks, shall have a play when it arrives and see what happens!
RE: Sumps XUD7 / XUD9 - ginge191 - 04-08-2016
Continuing with this - both sumps removed.
XUD7 sump 'fits' apart from a locating pin on the XUD9 block (which i can file down) and the screw holes are in different locations on the two longer edges.
Rather than buying a new XUD9 sump, could I get away with drilling new holes along the longer edges with a liquid gasket ?
(12-07-2016, 07:13 PM)darrenjlobb Wrote: Assume you mean XUD 7
Just to confirm, both oil pumps are the same - removed the XUD7 pump and compared - they're like for like
RE: Sumps XUD7 / XUD9 - Danny Wideboy - 04-08-2016
I have a spare sump here.
Not sure best way to post/send it?