Ph2 Gti relay layout - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Ph2 Gti relay layout (/showthread.php?tid=34136) |
Ph2 Gti relay layout - rocker8742 - 22-05-2016 Hi guys, in the 6 I currently have no control over hot and cold air in the cabin it's just constant heat. I had a look at the fusebox but I'm not sure which fuses / relays relate to the heater panel. Worth noting I do have lights on the heater panel and the AC and recirc buttons do work. Can anyone confirm which relays are supposed to be there and what order? I'll get a pic in a minute Sent from my iPhone using Tapatalk Pic as promised... Don't know why the brown relay on the left is in the green socket instead of the empty brown socket Sent from my iPhone using Tapatalk RE: Ph2 Gti relay layout - insomaniac45 - 22-05-2016 does the fan switch work? i.e controllable speed. is it not a cable operated flap that bypasses the air through either the heat exchanger or straight to the cabin. Ph2 Gti relay layout - rocker8742 - 22-05-2016 Fan switch works fine, and its definitely electronic, only got cable for direction Sent from my iPhone using Tapatalk RE: Ph2 Gti relay layout - insomaniac45 - 22-05-2016 could be a broken wire some where in there, as if that is really the only thing it does, is constant hot, i doubt it would be relay controlled, i would get a visual inspection on it, and check with multi meter to see if there is voltage at the actuator for the flap Just what i would do, as i have yet to peer into the heating system on these things lol. Ph2 Gti relay layout - rocker8742 - 22-05-2016 I will give it a go, just haven't got any idea where the actuator would be lol Need a decent amount of time to spend looking into it Sent from my iPhone using Tapatalk |