306oc - Peugeot 306 Owners Club & Forum
making door cards to accept manual windows - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: making door cards to accept manual windows (/showthread.php?tid=32445)



making door cards to accept manual windows - Matt - 05-11-2015

I'm after some manual window door cards but obviously they are rare as hens teeth, so I'm looking at adapting electric ones to accept the winder. So I need to know if the door card would work, does the card sit close enough to the door for this to work? Can someone post some pictures of their 3 door electric cards, and anyone with manual ones can you post some pictures of those up so I can try and work out some fitment.
I'm fed up of stripped doors now!
Regret giving away my door cards all those years ago!


RE: making door cards to accept manual windows - Niall - 05-11-2015

Will be the same all bar the hole in the door i would imagine mate.


RE: making door cards to accept manual windows - Matt - 05-11-2015

Looking at photos there isn't going to be enough room for winder to turn, the gap on manual door cards is much larger for the 360 turn. Blacktop the drawing board Sad


RE: making door cards to accept manual windows - Redordead89 - 06-11-2015

I'm about to come by a v early ph2 1.4 bianca 3 door pov spec to tear apart and this might just have winders, I'll let you know in the next couple of days!
All panels already promised to Cully if he wants them when it happens!


RE: making door cards to accept manual windows - bashbarnard - 06-11-2015

I done this. Hate electric windows. Have a look on my thread. You either need the lower half and split the cards or the entire door card.


RE: making door cards to accept manual windows - Matt - 06-11-2015

Any pictures bash? For some reason I can't see any pictures In your thread

Also I've pm,d you red


RE: making door cards to accept manual windows - bashbarnard - 06-11-2015

Afraid not man only pics i had were in the threads. You basically need to buy any door cards that are manual off a base spec car. Drill out all the plastic bits that they glue together and reassemble with the bottom half in place. Dont even have to stick them together as when you put them on the car they hold themselves. Smile


RE: making door cards to accept manual windows - Matt - 06-11-2015

Ahh see that's the problem, getting a 3door with manual windows is hard work