+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: This flywheel sensor? (/showthread.php?tid=31835)
This flywheel sensor? - pugtk - 07-09-2015
I need a new rev counter sensor fro my xud 1.9dt , Is this the correct one? They have in the description TDC sensor?
http://www.ebay.co.uk/itm/TDC-Sensor-Flywheel-for-Peugeot-/371407052745?fits=Model%3A306&hash=item567995dfc9
RE: This flywheel sensor? - ConorTRG - 07-09-2015
No this is it:
http://www.ebay.co.uk/itm/SPEED-SPEEDO-RPM-SENSOR-PEUGEOT-106-206-306-406-607-806-EXPERT-PARTNER-616070-/150775212212?fits=Car+Make%3APeugeot%7CModel%3A306&hash=item231ae728b4
RE: This flywheel sensor? - kee616 - 08-09-2015
My zx xud uses your link pugtk, looks about right
RE: This flywheel sensor? - andyyy - 08-09-2015
My 205 uses this type, http://pages.ebay.com/link/?nav=item.view&id=311417356556&alt=web
Not that I can get mine to work !
So depends what car its going in.
RE: This flywheel sensor? - pugtk - 08-09-2015
(07-09-2015, 11:17 PM)ConorTRG Wrote: No this is it:
http://www.ebay.co.uk/itm/SPEED-SPEEDO-RPM-SENSOR-PEUGEOT-106-206-306-406-607-806-EXPERT-PARTNER-616070-/150775212212?fits=Car+Make%3APeugeot%7CModel%3A306&hash=item231ae728b4
That's a speedo sensor not a flywheel sensor
(08-09-2015, 09:20 AM)andyyy Wrote: My 205 uses this type, http://pages.ebay.com/link/?nav=item.view&id=311417356556&alt=web
Not that I can get mine to work !
So depends what car its going in.
Hi Andy, its actually going in a 205 d turbo, and that connector looks like the correct one.
I was going to just solder the 306 connectors on as I couldn't find a 205 one.
However , it doesn't seem compatible with the 205 d turbo, I tried using there compatibility function on there page.
Although It looks pretty much spot on
RE: This flywheel sensor? - andyyy - 08-09-2015
I just bought one and it plugs straight into my 205 loom, I tried soldering the connectors from a 306 one previous and that didn't work for me.
I found the part number on service box for my 205 so assume it's correct for 205s.
I'll update if I figure out what's wrong
RE: This flywheel sensor? - pugtk - 08-09-2015
(08-09-2015, 04:03 PM)andyyy Wrote: I just bought one and it plugs straight into my 205 loom, I tried soldering the connectors from a 306 one previous and that didn't work for me.
I found the part number on service box for my 205 so assume it's correct for 205s.
I'll update if I figure out what's wrong
Is yours an original d turbo or did you fit the d turbo clocks to a base model dash?
RE: This flywheel sensor? - andyyy - 08-09-2015
Mine is a gti loom with stdt clocks
RE: This flywheel sensor? - pugtk - 09-09-2015
By any chance would you have the part number?
Thanks
RE: This flywheel sensor? - andyyy - 09-09-2015
I assume it's 616070 as that's how I found that part.
You can double check on service box yourself iv forgotten my sign in details and nowhere near my PC to get them.
RE: This flywheel sensor? - pugtk - 09-09-2015
Service box?
RE: This flywheel sensor? - welshpug - 09-09-2015
google mother trucker!
see link in my sig.
RE: This flywheel sensor? - andyyy - 29-09-2015
I can confirm that sensor I posted 100% works in a 205 with stdt clocks
RE: This flywheel sensor? - pugtk - 02-10-2015
(29-09-2015, 06:28 PM)andyyy Wrote: I can confirm that sensor I posted 100% works in a 205 with stdt clocks
Get your clocks working?
Ordered
RE: This flywheel sensor? - pugtk - 17-10-2015
So I've the sensor ready for fitting, what gap does it have to be set from the flywheel? Ive the feeler gauge ready to go
Now im just hoping I did refit the 205 flywheel, instead of the 306 one, (wondering if the pickup points are in different locations )
RE: This flywheel sensor? - andyyy - 17-10-2015
I just pushed it in until it goes no further, ie touching the flywheel. I'm using a 306 flywheel so can't comment, but did use aa 205 sensor bracket thing if you know what I mean.
RE: This flywheel sensor? - pugtk - 25-10-2015
(17-10-2015, 02:56 PM)andyyy Wrote: I just pushed it in until it goes no further, ie touching the flywheel. I'm using a 306 flywheel so can't comment, but did use aa 205 sensor bracket thing if you know what I mean.
Its working now
All electrics working, bar central locking, so thats next on the cards