+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: quickshift (/showthread.php?tid=30892)
quickshift - connorp - 16-06-2015
http://www.ebay.co.uk/itm/PEUGEOT-206-306-QUICK-SHIFT-/350601585985?pt=LH_DefaultDomain_3&hash=item51a17ba541
is this an alright budget quickshift or a no go??
RE: quickshift - Jonny81191 - 16-06-2015
They're fine generally, just sometimes the brass fittings come loose so need gluing or bigger grub screws
RE: quickshift - welshpug - 16-06-2015
a bit shit really, not very well executed, always come loose.
RE: quickshift - adam b - 16-06-2015
Detest mine
RE: quickshift - welshpug - 16-06-2015
I think they would work much better if the gearstick was sleeved so it fits tighter in the spherical bearing.
WELD THE lady garden!
RE: quickshift - Eeyore - 16-06-2015
How exactly do you put the stick through the ball? Do you have to remove the knob and the plastic off the top?
RE: quickshift - welshpug - 16-06-2015
plastic? just pull the knob off, cut the plastic ball away and slide the stick through the spherical joint with a collar each side, well not so much slide but dick in a shirtsleeve kinda thing.
RE: quickshift - thododd - 16-06-2015
i think he meant the plastic sleeve the knob sits on?
I drilled a couple dimples in the shaft for the grub screws to sit in (on the compbrake QS on my ax)
RE: quickshift - welshpug - 16-06-2015
never seen that on a 306, only later 406's with cable shift.
RE: quickshift - thododd - 16-06-2015
my 306 has it, wierd white plastic sleeve with a ridge down either side (to stop the knob rotating on the shaft) does this just pull off like the knob? I didnt want to force it and shatter the damn thing
RE: quickshift - Mattcheese31 - 16-06-2015
(16-06-2015, 03:46 PM)thododd Wrote: my 306 has it, wierd white plastic sleeve with a ridge down either side (to stop the knob rotating on the shaft) does this just pull off like the knob? I didnt want to force it and shatter the damn thing
They don't seem to come off, shattered when I tried anyway.
RE: quickshift - Lwilliams - 16-06-2015
I welded the collars on mine either side if it helps
It was already fitted previously but was a bit poo, didn't hold up 5 mins on track.
RE: quickshift - kentiiboii - 16-06-2015
(16-06-2015, 03:23 PM)welshpug Wrote: never seen that on a 306, only later 406's with cable shift.I think he means for the lift reverse on a gti6.
I had to slice mine off and tiger seal it back on with a few cable ties.
RE: quickshift - maxzy - 17-06-2015
The cheaper way for quickshift is to extend the length of gear stick around 2"
Shift feeling are better !
RE: quickshift - Mattcheese31 - 17-06-2015
(17-06-2015, 09:50 AM)maxzy Wrote: The cheaper way for quickshift is to extend the length of gear stick around 2"
Shift feeling are better !
Drugs are not ok
RE: quickshift - impotentials - 17-06-2015
(16-06-2015, 12:18 PM)connorp Wrote: http://www.ebay.co.uk/itm/PEUGEOT-206-306-QUICK-SHIFT-/350601585985?pt=LH_DefaultDomain_3&hash=item51a17ba541
is this an alright budget quickshift or a no go??
I got a pug1off one a couple of years ago. Never skipped a beat. Seems solid and im sure it was cheap as.
RE: quickshift - Piggy - 17-06-2015
(16-06-2015, 04:08 PM)Lwilliams Wrote: I welded the collars on mine either side if it helps
mine are welded too
RE: quickshift - Pebbles167 - 17-06-2015
Just fitted this to the 306 HDi. Hasn't shortened the shift by a huge amount, but its noticeable. Also gives the change a very firm feel. Took 20 minutes to fit as it's a direct replacement.
Unsure if it will fit a Gti6. And definitely won't fit cars with cable gear linkage, suitable for mechanical type only.
http://m.ebay.co.uk/itm/DIRENZA-PEUGEOT-106-206-306-ALL-MODELS-SHORT-SHIFTER-QUICK-SHIFT-WITH-GEARKNOB-/150952534271
RE: quickshift - kentiiboii - 18-06-2015
(17-06-2015, 11:51 PM)Pebbles167 Wrote: Just fitted this to the 306 HDi. Hasn't shortened the shift by a huge amount, but its noticeable. Also gives the change a very firm feel. Took 20 minutes to fit as it's a direct replacement.I think this would fit a gti6, you just have to make the lift reverse attach somewhere.
Unsure if it will fit a Gti6. And definitely won't fit cars with cable gear linkage, suitable for mechanical type only.
http://m.ebay.co.uk/itm/DIRENZA-PEUGEOT-106-206-306-ALL-MODELS-SHORT-SHIFTER-QUICK-SHIFT-WITH-GEARKNOB-/150952534271