+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Dilema (/showthread.php?tid=30747)
Dilema - Matt - 05-06-2015
My f*cking camshaft has just snapped. Well I'm guessing it has, as the cam pulley is hanging out and at an angle.
I have a breaker on my drive, is it as simple as taking the camshaft out of one and placing in the other?
The breaking on my drive had suspected head gasket issues.
So in my head I'm in two minds, strip the car back, replace the camshaft and so be it. (But is there any danger here of the bottom end going? Been told they are directly linked?)
Or change the head gasket on the breaker take the engine out and then fit too mine
Bearing in my that both jobs I've never done before
RE: Dilema - 1616six - 05-06-2015
I believe you need the rockers too.
RE: Dilema - Matt - 05-06-2015
I have a full car, so anything I need will be there, just is it worth the risk? Is something else likely to go after?
RE: Dilema - cully - 05-06-2015
why did the cam break?
they dont break for fun something major has happened i expect
RE: Dilema - Matt - 05-06-2015
I don't know, I pulled up the road, turned out of my road and the Heard the worst noise and then it cut out on me
tbh I leaning towards changing the engine, just haven't got the time or the tools to do that right now
RE: Dilema - Seb_Ryan - 05-06-2015
Id say its bent a valve or 2.. Mate of mine left locking pin in cam, tried to start it and snapped cam and bent 2 valves