![]() |
Wheel bolts for cyclones - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: Wheel bolts for cyclones (/showthread.php?tid=29581) |
Wheel bolts for cyclones - SACHAx - 08-03-2015 Managed to get some cyclone wheels to replace the standard meridian ones, but the bots are different so if any 1 can help Thanks RE: Wheel bolts wanted for cyclones - cully - 08-03-2015 there are two types of clones early set take a flat seated bolt that has no tapered shoulder later clones have a counter bore in the bolt holes which accept the later bolts that have a shoulder which secures the steel spare wheel ![]() RE: Wheel bolts for cyclones - welshpug - 08-03-2015 ive got a set of the later ones inc locking bolts if you need them. RE: Wheel bolts for cyclones - SACHAx - 08-03-2015 (08-03-2015, 07:51 AM)welshpug Wrote: ive got a set of the later ones inc locking bolts if you need them. Which 1s are the later 1s mate? RE: Wheel bolts for cyclones - cully - 08-03-2015 (08-03-2015, 04:53 PM)SACHAx Wrote:(08-03-2015, 07:51 AM)welshpug Wrote: ive got a set of the later ones inc locking bolts if you need them. later ones are the bolt on the left in the picture RE: Wheel bolts for cyclones - SACHAx - 08-03-2015 (08-03-2015, 04:56 PM)cully Wrote:(08-03-2015, 04:53 PM)SACHAx Wrote:(08-03-2015, 07:51 AM)welshpug Wrote: ive got a set of the later ones inc locking bolts if you need them. I think it's the early set I need then mate, as the standard 1s off the meridian wheels I believe look like that then? RE: Wheel bolts for cyclones - Jonny81191 - 08-03-2015 I thought it was the GTI ones that had just the flat seated bolts as the spare was an alloy, whereas the other type was off the meridians etc, and ran a steel spare hence the taper? RE: Wheel bolts for cyclones - SACHAx - 08-03-2015 (08-03-2015, 06:22 PM)Jonny81191 Wrote: I thought it was the GTI ones that had just the flat seated bolts as the spare was an alloy, whereas the other type was off the meridians etc, and ran a steel spare hence the taper? Yea I think it's the GTI bolts I need without the taper RE: Wheel bolts for cyclones - Dale - 09-03-2015 You have a pm ![]() RE: Wheel bolts for cyclones - WiNgNuTz - 09-03-2015 (09-03-2015, 10:44 PM)Dale Wrote: You have a pm They won't be able to reply to it, as they don't have enough posts. This seems a bit like a "Wanted" thread to me, so should be in the Wanted section, but then the OP can't post in there either due to lack of posts. Naughty naughty. ![]() RE: Wheel bolts for cyclones - Dale - 09-03-2015 (09-03-2015, 10:51 PM)WiNgNuTz Wrote:(09-03-2015, 10:44 PM)Dale Wrote: You have a pm Ooooo I see they best get posting in that caseĀ ![]() |