![]() |
p bush upgrade - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19) +--- Thread: p bush upgrade (/showthread.php?tid=29011) |
p bush upgrade - tuttyboy84 - 31-01-2015 I need a new wishbone and ive read on here that the partner p bush is a good upgrade, can i just buy a partner wishbone to replace mine and then it should have the uprated bush fitted or will it not fit? RE: p bush upgrade - Mattcheese31 - 31-01-2015 Think you need a bigger bolt there's a thread in it somewhere RE: p bush upgrade - Jimbo - 31-01-2015 Just get the partner p bushes fitted onto your current arm, genuine arms are heaps better than aftermarket ones which can fail, i had the front bush literally snap off at 50mph not cool RE: p bush upgrade - tuttyboy84 - 31-01-2015 How will i know if mine are oe as its an old car so may have had wishbones replaced in the past??? RE: p bush upgrade - cully - 31-01-2015 normaly the oe arms have bolts holding the balljoint on and the patern are rivited RE: p bush upgrade - tuttyboy84 - 31-01-2015 Also which are the best p bush to buy as there are loads of different ones on ebay RE: p bush upgrade - HDi--Power - 31-01-2015 (31-01-2015, 03:29 PM)cully Wrote: normaly the oe arms have bolts holding the balljoint on and the patern are rivited Every pattern iv ever had had bolts and the OE ones had rivets ![]() RE: p bush upgrade - welshpug - 31-01-2015 o.e are not rivetted. p bush upgrade - Frosty - 31-01-2015 (31-01-2015, 04:15 PM)HDi--Power Wrote:(31-01-2015, 03:29 PM)cully Wrote: normaly the oe arms have bolts holding the balljoint on and the patern are rivited Wrong way round from what I have always seen RE: p bush upgrade - tuttyboy84 - 14-02-2015 Ecp sell twr partner p bushs and ocap ones has anyone used the ocap ones or should i just go for the twr's |