+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: egr blank & mbc please help chaps (/showthread.php?tid=28587)
egr blank & mbc please help chaps - dirtyboost89 - 05-01-2015
how is the best way to blank my egr correctly, could anyone run me through it (is the dw10 blanking plate on ebay good to use? and how do i fit a mbc? ive got a brass ball and spring one.
cheers chaps
RE: egr blank & mbc please help chaps - Eeyore - 05-01-2015
so on the inlet manifold the egr pipe comes off there and you ned to fit a blank between the two. See if you can find the push in type. Its easier to fit instead of trying to get it to line up and put the bolts through....
http://www.ebay.co.uk/itm/121364431799?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
RE: egr blank & mbc please help chaps - dirtyboost89 - 05-01-2015
will it seal well? do you have any tips on fitting the mbc?
RE: egr blank & mbc please help chaps - shervo - 06-01-2015
Manual boost controllers are relatively easy to fit, it seems a hard task at first but its not. I removed the track rod end from the hub to give myself some arm room then its a case of get your arms in there and remove and fit pipes