+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: 11mm Bosch (/showthread.php?tid=28244)
11mm Bosch - Cbray2003 - 10-12-2014
Hi there as above I'm after an 11mm pump in gd working order thanks
RE: 11mm Bosch - Piggy - 10-12-2014
give me a month or so and I may have mine for sale.
RE: 11mm Bosch - Nathan1305 - 10-12-2014
(10-12-2014, 05:07 PM)Piggy Wrote: give me a month or so and I may have mine for sale.
Would that be with lines and injectors piggy?
RE: 11mm Bosch - Cbray2003 - 10-12-2014
How much
RE: 11mm Bosch - Piggy - 10-12-2014
Nah just pump.
RE: 11mm Bosch - Cbray2003 - 07-01-2015
Piggy u still getting rid of that pump or u not sorted yet
RE: 11mm Bosch - Piggy - 07-01-2015
Erm not yet. I am in middle of rebuilding and resealing a 9mm...I could source a 11mm head if you really cant find one anywhere else
11mm Bosch - mspdan - 07-01-2015
Aren't 11mm pumps put on older transits sure I read that somewhere?
RE: 11mm Bosch - Piggy - 07-01-2015
Among other motors yeah
But basically only the head is used from the transit pump
RE: 11mm Bosch - Cbray2003 - 07-01-2015
I'll keep looking around but I'll let u know thanks
RE: 11mm Bosch - mspdan - 07-01-2015
if that is the case i have several 11mm pumps sat on engines if you still need one
RE: 11mm Bosch - nominous - 08-01-2015
How much for a tranny pump ?
RE: 11mm Bosch - Cbray2003 - 09-01-2015
(07-01-2015, 11:05 PM)mspdan Wrote: if that is the case i have several 11mm pumps sat on engines if you still need one
Location and how much for one and r they straight bolt on to the Xud thanks
RE: 11mm Bosch - Dave - 10-01-2015
no defo not bolt onto the xud, they need stripping and parts from both joining together.
RE: 11mm Bosch - Cbray2003 - 10-01-2015
Ok that's fine how much would u want for one
RE: 11mm Bosch - ash23 - 10-01-2015
how much of a rush are you for one i have 5 stock 9mm pumps at my workshop i can /could build to a 11mm / put all new seals in. its just getting the time to do it.