+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: help please (/showthread.php?tid=26813)
help please - gilroy97 - 23-09-2014
cant get my fog lights off can someone help, cant figure out how to get them out
help please - Razorback_Rob - 23-09-2014
What phase? And what have you tried already? You usually take the connector off and take the screws out
RE: help please - gilroy97 - 23-09-2014
phase 1 and der is only 1 bolt holdin them on (or so i can see) even wit the bolt off the fog lamp wont come away from the bumper its really puzzling me!?
RE: help please - 306Dan - 23-09-2014
probably be faster to take the bumper off then you can see all the bolts
RE: help please - gilroy97 - 23-09-2014
how would i go about doing so?
RE: help please - 306Dan - 23-09-2014
3x13mm nuts either side on the lower slam panel, you need to go from the inner archs n/s is quite easy to access o/s a wee trickier unless you remove the washer bottle or your used to not being able to see
RE: help please - Mattcheese31 - 23-09-2014
Take the nut off the bottom, disconnect the wiring and wiggle them out..
RE: help please - Poodle - 26-09-2014
3x13mm? Is it different on the ph1s? Every 306 i've worked on it's 2x10mm each side.
RE: help please - Mattcheese31 - 26-09-2014
(26-09-2014, 12:26 PM)Poodle Wrote: 3x13mm? Is it different on the ph1s? Every 306 i've worked on it's 2x10mm each side.
different yes mate . .
