+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Turbo talk (/showthread.php?tid=25943)
Turbo talk - Danny2009 - 14-08-2014
Right, if I weld the flap shut on a t2 for the wastegate arm and left the wastegate arm off the turbo and plumbed in a mbc could I control the boost with the mbc or am I missing something
RE: Turbo talk - bashbarnard - 14-08-2014
Mbc by itself will control boost. If you weld anything you take away ability to adjust it.
RE: Turbo talk - Dave - 15-08-2014
Yess Danny you are missing something. When the MBC opens at a set pressure it opens the boost can which opens the wastegate, If this is welded closed then it wont open rendering the MBC useless...
RE: Turbo talk - Danny2009 - 15-08-2014
Had a think about it this morning when I'd sobered up and realised that wouldn't work
Welded shut and control with fuel seems to be the way I'm going then
RE: Turbo talk - nominous - 15-08-2014
If the wastegate is just disconnected, what will a T2 push up to ?
On a 9mm with max fuel screw adjust just lower than 2K revving and LDA rotate.
RE: Turbo talk - Jimbo - 15-08-2014
30+ psi
Would be well out its efficency range though.
RE: Turbo talk - ADV_93 - 16-08-2014
Did you get any pics of turbo?