+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Couple of bosch questions... (/showthread.php?tid=25733)
Couple of bosch questions... - philpemberton94 - 04-08-2014
When switching from a lucas to a bosch is the plug for the stop solenoid the same and will it be and issue that my dt has an immobiliser?
Also does anyone know the thread pitch of the studs for the pump? Gonna get a couple of nuts to extract them instead of using the ones for the pump itself
Cheers!
RE: Couple of bosch questions... - Dave - 05-08-2014
Its just a 12v ignition to the stop solenoid on the bosch, this can be spliced from one of the cables that originally went to the lucas, think its red or yellow? The studs are M8.
RE: Couple of bosch questions... - philpemberton94 - 05-08-2014
Brilliant, cheers!
RE: Couple of bosch questions... - mr_fish - 05-08-2014
99% sure its the red wire from the lucas plug that your looking for
RE: Couple of bosch questions... - philpemberton94 - 05-08-2014
Cheers! I'll check it with a multimeter first, does the immobiliser pose a problem at all?
Also do you know where i can get an injector seal kit?
RE: Couple of bosch questions... - Dave - 05-08-2014
Injector seal kit pug or motor factor might do them, no problem with immobilliser once you run ignition to solenoid valve.
RE: Couple of bosch questions... - philpemberton94 - 05-08-2014
That will do nicely cheers for the help
RE: Couple of bosch questions... - pioneer DJ paddy - 05-08-2014
http://m.ebay.co.uk/itm/270732384297#ht_500wt_1156
Here is the address for ev bosch pump kit seal :-)
I swaped my lucus for a bosch nt long a go just make sure u get every thing with it like bracket injector lines and so on lol
RE: Couple of bosch questions... - philpemberton94 - 05-08-2014
Says the listing has ended and item has been removed pal
RE: Couple of bosch questions... - mr_fish - 05-08-2014
Think this is what he wanted paddy.
XUD Injector Fire Seals and Copper Washers
Correct me if i'm wrong though.
RE: Couple of bosch questions... - philpemberton94 - 05-08-2014
(05-08-2014, 11:42 AM)mr_fish Wrote: Think this is what he wanted paddy.
XUD Injector Fire Seals and Copper Washers
Correct me if i'm wrong though.
That is precisely what I need! Thank you sir!!
RE: Couple of bosch questions... - pioneer DJ paddy - 05-08-2014
Lol ohhhh right :-)