306oc - Peugeot 306 Owners Club & Forum
V6 COMPLETE CONVERSION - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: V6 COMPLETE CONVERSION (/showthread.php?tid=25688)



V6 COMPLETE CONVERSION - 306gtiparts - 02-08-2014

Up for sale is a complete conversion for a 3.0 V6 conversion, i will include the subframe / engine / gearbox / wiring loom with unlocked ecu modified clutch setup, will be removed complete so readt to drop straight in. £650 plus postage, Most of UK mainland is £50 Del


V6 COMPLETE CONVERSION - Ben Jay - 03-08-2014

£650 seems a bit steep to me. But I'm not 100% clued up whey those parts are worth.


RE: V6 COMPLETE CONVERSION - RetroPug - 03-08-2014

It's not considering how much you'd pay if you started the conversion from scratch.


RE: V6 COMPLETE CONVERSION - 306gtiparts - 03-08-2014

(03-08-2014, 09:43 AM)Ben Jay Wrote: £650 seems a bit steep to me. But I'm not 100% clued up whey those parts are worth.

Not when a standard engine with loom and gearbox sells for around £350, With this your getting all of that with unlocked ECU / Hydraulic clutch to cable conversion parts / modified subframe / radiator and piping and custom engine mounts, custom driveshafts etc

Regards


V6 COMPLETE CONVERSION - Sambarker - 04-08-2014

Would love to drop this lot in a ph1 roland garros cabby, but too many projects already!


RE: V6 COMPLETE CONVERSION - calibra306 - 04-08-2014

(03-08-2014, 12:51 PM)RetroPug Wrote: It's not considering how much you'd pay if you started the conversion from scratch.
I had mine done by pug1off Jan last year and correct it was not cheap so £600+ is a good price as long as the engine is at the correct tilt and position.

Is the drivers side engine mount a bolt in or weld in one?