HDi lower intercooler pipe - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: HDi lower intercooler pipe (/showthread.php?tid=24197)

HDi lower intercooler pipe - HDi--Power - 22-05-2014 My 406 one lasted a matter of weeks and the 2.2 HDi one although better has now somehow split in two and is leaking something terrible. So I set about making a nice stainless one but discovered a simple 90 bend is the perfect shape to tuck nicely in the gap between engine and gearbox. I welded on a reducer to the end to fit my silicone but this is not needed, so if you could get old of some old 90 stainless bends you could have yourself a cheap much improved lower pipe and lose that 38mm restriction on the OEM pipes Its actually a better fit than the 2.2 one which is bent about 80 degrees or so, could be worth a rummage in the local metal recyclers from this : to this : RE: HDi lower intercooler pipe - C.A.R. - 23-05-2014 So you going to start making these for others then?! Hehe RE: HDi lower intercooler pipe - madmadmax - 23-05-2014 f*ck the 90 degree bend off and see if you can get a 45 degree in there RE: HDi lower intercooler pipe - HDi--Power - 24-05-2014 You could easily do that or even get it so a straight joiner fits but this is a more simple design for those looking for an alternative cheap to make/have made for you RE: HDi lower intercooler pipe - tuttyboy84 - 04-12-2014 How long did you make the straight pipes matr RE: HDi lower intercooler pipe - DeeTurbo - 05-12-2014 That 90* pipe looks nice but IMO the 2.2 one looks like it would flow better.