+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Front arm ball joints (/showthread.php?tid=24156)
Front arm ball joints - BenDturbo1 - 21-05-2014
Hi there I've recently fitted 2 new ball joints and they have gone after a month or two. Is there anything that could be causing them to go easier? Knackered hubs? Anything like that maybe?
Thanks!
RE: Front arm ball joints - cully - 21-05-2014
check the locating hole in the hub is not oval
are the pinch bolts tight?
Re: Front arm ball joints - kentiiboii - 21-05-2014
Second what cully said. I had to change my whole hub for this reason...
RE: Front arm ball joints - BenDturbo1 - 31-05-2014
If it's not that could it be anything else?
RE: Front arm ball joints - Mattcheese31 - 31-05-2014
(31-05-2014, 01:18 PM)BenDturbo1 Wrote: If it's not that could it be anything else?
i guess if tracking is way out it won't help, did you buy silly cheap ones? . .
RE: Front arm ball joints - BenDturbo1 - 31-05-2014
I've had tracking done, checked the hubs and they don't look the best so gonna get some new hubs and ball joints! Would I benefit from changing them to the gti6 ones as I'm changing them? And they were quite cheap so gonna buy abit dearer ones cause you pay for what you get?