306oc - Peugeot 306 Owners Club & Forum
I'm back....GTIDI inside - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: I'm back....GTIDI inside (/showthread.php?tid=23559)

Pages: 1 2

I'm back....GTIDI inside - strictly_perv - 25-04-2014

I'm back in the 306 game once again, after saying never again. I'm sure you all understand.

So the car, it's a GTI-6 converted to an XUD from a 406 which is good as I get the '6 spec but an Eco engine. When I got the car it ran mechanically sound but was an unfinished project so have done lots if niggly bits to get it to a decent enough standard.
The spec:

Obviously GTI chassis so 283 brakes ect ect.....
XUD engine with 9mm Bosch (off my old 205) and k14 soon to be FMIC
Lowered
Deep dish wheel
Wind deflectors
A few other bits and bobs so will update when I remember


Some if you may recognise the car but here's a few pics

[Image: 6070C487-5F70-47AE-BBA4-D0278A7E99D7_zps1gzx4c5d.jpg]

[Image: 3E62458F-14DE-42FF-8743-F22FB3D481E2_zpsmhsq0qhq.jpg]

[Image: CE35AC0D-5E09-43FF-A74F-F1677D6812A4_zpsymrmqefe.jpg]

[Image: 23A38612-8C20-4EE2-9EA8-0DD6054E0E2D_zpsyjzgjpdm.jpg]

[Image: F8DAC041-612B-4A48-B4C1-13B07D386FDF_zps7qr4oo3i.jpg]

RE: I'm back....GTIDI inside - silverzx - 25-04-2014

So whos was this before?

Looks good.

I'm back....GTIDI inside - td_dan - 25-04-2014

Misstap?

RE: I'm back....GTIDI inside - strictly_perv - 25-04-2014

Yeah Misstaps, my sisters old car Smile

RE: I'm back....GTIDI inside - silverzx - 25-04-2014

Sweet, know it's been looked after then! Tongue

RE: I'm back....GTIDI inside - cully - 25-04-2014

i have the 6 engine and ecu that came out of that car

Smile

RE: I'm back....GTIDI inside - Eeyore - 25-04-2014

awww forum car! Big Grin

RE: I'm back....GTIDI inside - Ruan - 25-04-2014

Glad to see this thing back!

RE: I'm back....GTIDI inside - ginge191 - 25-04-2014

(25-04-2014, 10:25 AM)Ruan Wrote: Glad to see this thing back!

Amen
Getting it to any shows this year??? Smile

RE: I'm back....GTIDI inside - Matt - 25-04-2014

Good to see a project thread up Big Grin

You looked right at home in it when I last saw you haha!

RE: I'm back....GTIDI inside - mr_fish - 25-04-2014

didn't think I would be seeing this beast again....

Whats the plans?

RE: I'm back....GTIDI inside - strictly_perv - 25-04-2014

Plans are a general tidy up, fit the FMIC kit I bought and maybe fit the GT20 that's sat in the garage. After destroy various turbos and engines I really want to be sensible this time round Sad yawn.
Since I've owned it I've replaced the aux belt, handbrake cables, fixed the fans and hot wired the high speed fan to come on with the AC button, fixed the speedo and re-tuned the pump as it was set up for the K04 powered 205 but slightly de-tuned so it had chronic coal.

RE: I'm back....GTIDI inside - procta - 26-04-2014

nice to see you back, but you need to build another good hard core Dturbo like the 205 was!

RE: I'm back....GTIDI inside - strictly_perv - 29-04-2014

Wish I could, but need to keep this sensible and reliable for work....sad face.

RE: I'm back....GTIDI inside - mikey b - 29-04-2014

Still looks good every one always goes back to the 306

RE: I'm back....GTIDI inside - MissTap_GTI6 - 29-04-2014

I'm glad she is still in the family... Plus, I can't wait to drive it after all the work you have done/are doing on it Big Grin

RE: I'm back....GTIDI inside - strictly_perv - 01-05-2014

I've got an intercooler kit, any ideas for the best route to take it as it has a GTI rad with a built in expansion tank like the hdi's.

RE: I'm back....GTIDI inside - Niall - 01-05-2014

Where are the outlets on it?

RE: I'm back....GTIDI inside - strictly_perv - 01-05-2014

It's just a cheapo eBay special side entry one.

I'm back....GTIDI inside - Frosty - 02-05-2014

I think there is a bit of room on passenger side of the rad to go thru. Think 2" pipe fits thru it ok. Pretty sure the rad is the same as ph1s Dturbos

RE: I'm back....GTIDI inside - 7057sam - 02-05-2014

Looks great Smile

white and diablo really go.

RE: I'm back....GTIDI inside - Piggy - 02-05-2014

Nice to have ya back.... Smile

RE: I'm back....GTIDI inside - Matt - 02-05-2014

(02-05-2014, 05:45 AM)Frosty Wrote: I think there is a bit of room on passenger side of the rad to go thru. Think 2" pipe fits thru it ok. Pretty sure the rad is the same as ph1s Dturbos


This

RE: I'm back....GTIDI inside - strictly_perv - 04-05-2014

Thanks Frosty, I bought a 2" kit, it's what I've always used.
When I had the sedan I just put the pipes over the rad which looked identical to this one, not ideal as rad was leaning back. I could always chop into the slam panel?
It's running no cooler at the moment and even at stock boost levels I can really feel the heat soak :/ need to get this on ASAP

RE: I'm back....GTIDI inside - Grant - 04-05-2014

Nialls cut into his slam panel to go down the front of the rad. Quite a good route TBF.

RE: I'm back....GTIDI inside - strictly_perv - 04-05-2014

I might do that then, like this but cut the slam panel out a bit

[Image: null_zpsc69ad391.jpg]

RE: I'm back....GTIDI inside - Paul_13 - 04-05-2014

What's that front mount off of?

RE: I'm back....GTIDI inside - Niall - 04-05-2014

(04-05-2014, 07:32 AM)Grant Wrote: Nialls cut into his slam panel to go down the front of the rad. Quite a good route TBF.

It is a good route but very tight. Also my rad is now moved back 10mm at the top lol

RE: I'm back....GTIDI inside - strictly_perv - 04-05-2014

That's a forge cooler, had it on 3 cars, another before my ownership but I believe it came off a Derv Doctor FMIC kit from years back.

Niall, how much did you cut out the panel?

RE: I'm back....GTIDI inside - Niall - 04-05-2014

[attachment=15971]

That much Smile